台上KS7365-EJ Folding-Z键盘站在第2层评论|斯威特沃特188金宝搏官网是多少

2023年2月17日,史蒂夫的WI 音乐背景:爱好的音乐家

分解成4块存储,容易组装。他们虽然od一样超级产品出现。谢谢

通过从tippcity肖恩·摩尔,2023年1月17日,哦

在舞台上“去做,最好的键盘站在它的类,价格。
重型重量评级,多才多艺,最小的房地产脚印。商店快速和容易。
这是我的新毕业生和破折号代表吉格斯和工作室。
结构坚固,高端工程进入这个站”显示,
这是一个买,你不会后悔,斯威特沃特打电话,让他们的船今天你一个,188金宝搏官网是多少
谢谢弗兰克Gerdts”我个人的销售工程师@斯威特沃特188金宝搏官网是多少
甜的水最好的地方为所有你的专业需求
肖恩·摩尔生产商/工程师工作室的主人
Groovy电路工作室

通过从Tujunga史蒂芬·普雷斯利,CA 1月3日,2023年音乐背景:职业音乐家,生产商

对键盘站我很挑剔,我只寻找最好的解决方案我宝贵的工具。几年前我买了其中的一个代表着两个4倍频程合成器,我非常高兴。这是坚如磐石。这是相当容易组装和紧凑的方式很容易设置为我的相对较小的作品。拥有un-wasted空间对我的工具是很重要的在我的工作室,和这并不占用更多的空间比是必要的。尤其是我使用踏板,我也欣赏,有大量的伸腿空间,与X型。它看起来不错!

所以当我的儿子需要一个双键盘站我给他买了这个站过圣诞节。相比之下我如何使用我的,他现在是举行大型和重型88加权键键盘,长76键synth在顶层。因为这台上站可以举起400磅,这是坐在非常牢固的与这个设置。它不让步或反弹与其他站我经历过。我还没有看到任何其他代表固体和多才多艺。强烈推荐对任何需要两层键盘站。

从阳光明媚的罗恩·弗莱克俄亥俄州广州9月26日,2022年背景:音乐编曲、键盘、工程师和的专家

在第一层有一个Korg 73关键SV1这是一个相当沉重的键盘。61年第2层超级光关键更新冲动。所以有一个站,可以裸的怀特岛SV1是好的,但更新光可以带来另一个问题,包括泡沫橡胶胶粘剂地带解决得很好。

我有沉重的联系,当你化合物的重量SV1找到合适的站,成为重要因素。的400磅能力舞台KS7365-EJ不是过度,而是要求当你考虑你的投资将最有可能的地方。我发现它是坚如磐石。

我考虑购买另一个罗兹。我认为这将是最终的测试。

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="373868">

斯威特188金宝搏官网是多少沃特客户8月30日,2022年

这是一个重型坚固的键盘站。很容易在5分钟。它同时支持我的数码钢琴。
我从斯威特沃特购买了许多项目,像往常一样,双钢琴站正是描述表示。188金宝搏官网是多少钢琴站和服务我非常满意接待来自斯威特沃特。188金宝搏官网是多少

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="370276">

沃尔特·戴维斯从格兰岱尔市,2022年5月27日,亚利桑那州背景:音乐作曲家、编曲、古典和爵士,钢琴/键盘/低音大提琴/明目的功效

我承认不喜欢看着品牌,主要原因是大量廉价麦克风站我不得不使用,最终分崩离析后使用太少等等。

这个站超过弥补了这些经历,让我知道他们可以做出好的装备,至少在这种情况下,最好的我发现!

我之前买了大力神KS410B站,以为一定是明显优越的产品任何在台上。我(我)有些失望的产品;它工作,调整容易,但它不像我想的那样稳定,感觉可不可以长期使用的。

OTOH这台上站,非常坚固,折叠起来非常紧,非常轻量级的坚固和便携式。我也得到了gig的袋子,我发现是至关重要的(也是一个不错的额外袋延长线等)也很坚实,看起来仍然崭新的一个月后的正常使用。思想:这站是小和轻量级的,但对于如何坚固,体格健美的,和精心设计,可以让它更糟!

几个小抱怨:其中一个螺栓旋钮旋转很容易打开和关闭帖子(很好),但其他有点硬,这要花很长的时间来拆卸和重新组装站(由不到一分钟,但仍然)。同时,设置高度调整容易是正确的,腿上的制动器实现但很难找到正确的止动装置的位置。同时,我肯定会_not_想和任何调整高度重比1安装在它。不应该这样做,但这是一个小点的上述大力神的立场。在任何情况下,谬论仍然不足以让一个坚实的五星级评级从我!

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="359992">

202188金宝搏官网是多少2年4月14日,由斯威特沃特客户

我敢打赌,这个东西可以支持其额定容量的两倍!简单的总和。容易进行精细调整。不能装载在/那样简洁“塔”类型,但它给信心,了解你的键盘不会摔倒,使得它值得的额外的努力。

从大Timothy g . Slazyk岛,纽约,美国在2022年2月16日音乐背景:我是一个吉他和钢琴爱好者,但连续2牧师是我的真爱。我来自一个家庭的音乐家是我的灵感,尤其是我的父亲,沃尔特·J Slazyk的键盘和吉他手。

我不会感到更快乐,之后购买KS7365-EJ Folding-Z键盘站和2层。我用第二层组件像一个混合器,音频接口,耳机,和阅读材料。站采用重型钢铁和玩时不移动或摇晃。我肯定会买更多的产品从“舞台”,当需要。优秀的建筑键盘站。强烈推荐。史密斯联系康纳斯威特沃特的更多细节。188金宝搏官网是多少

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="347398">

斯威特188金宝搏官网是多少沃特客户1月4日,2022年音乐背景:历史

伟大的架子上。简单,快速组装和安装。固体,重型的支持。伟大的设计。超级多功能,方便调整给它一个定制适合各种齿轮。我希望我很久以前就发现了这个单位。质量我很满意,时尚的设计、稳定性、固体和整体构建,我买另一个。

202188金宝搏官网是多少1年12月18日,斯威特沃特客户

非常好,结实!

通过从东部草原明迪,莫11月6日,2021年背景音乐:主唱和肯塔基州西部建立乐队键盘手

我有一些不同的键盘站在我的有生之年,和每一个人——而不同——有同样的问题——我的钥匙应该幻灯片和站会动摇……几天前我收到这站和测试出来昨晚第一次……站一动也不动,我的钥匙没有了……让我完全专注于玩而不用担心不稳定……这个站是值得每一分钱。

史蒂文·麦金利从拉斯维加斯,内华达州6月24日,2021年音乐背景:经历了长时间的音乐家,各种乐器,贝斯,吉他和键盘

站了几天早期惊讶我相比其他公司销售过程。我的销售工程师马特·布鲁克斯非常有用的购买键盘站,他非常丰富的产品和向客户.......斯威特沃特承诺188金宝搏官网是多少

西弗吉尼亚州的贾斯汀马丁斯堡的5月12日,2021年音乐背景:工业摇滚/金属,专业水平关键,老式模拟修复技术

这是一个很好的坚固的产品,是它的目的很好。更重要的是金本位斯威特沃特提供的客户服务,和他们好得反常航运实践。188金宝搏官网是多少

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="312930">

2021年4月26日,由凯文来自加州音乐背景:鼓,键盘,寒鸦等等

我以前拥有x样式站在一个通用2层。X站很不稳定,它一直干扰我的创作过程。再也忍不住了,命令这个站。很高兴我做了。
波动都消失了。当测试推动它甚至不移动。我除了对这个站的质量印象深刻。现在,我可以专心做音乐,而不是试图找出如何阻止那些该死的波动!

如果波动快把你逼疯了,这是处方。,)

2021年1月26日,史蒂夫·菲利普斯

我买了2 - 2 TEIR站。他们非常坚固的和强大的。他们没有任何波动,不要振动或震动时打键盘。我一直在处理格兰特EMBREY斯威特沃特,他是最伟大的。188金宝搏官网是多少他是真实的和诚实的,是直接的产品。

由布鲁斯从西方佤邦1月19日,2021年音乐背景:自学成才的,键盘,长笛和吉他自童年

虽然不是USA-made,我很高兴地报告,建设质量,材料和强度这个键盘站都是优秀的。容易组装,所有部件提供了完美的和这个站的工作支持我的两个沉重的键盘。宽度和高度调整容易,8(用户装机)橡胶垫的单位确保我的键盘不滑或偏离的支持这个站的酒吧。我个人的意见是,这种“Z”风格是最适合安装在你不拖你的装备和站演出;作为“Z”风格的拆卸/重组站更涉及那些“X”风格是您刚刚展开,直到弹簧销点击到位,但是……如果你正在寻找一个坚实的、制作精良的两层的键盘,这个模型自信符合该法案。我很高兴和我购买,再次感谢你,斯威特沃特!188金宝搏官网是多少

通过从塔尔萨里克·g .,好吧。2020年10月6日

因为我让我家工作室的另一个键盘我需要一个堆栈来拯救我的两个键盘
空间。这石头很坚固的&建得很好。我看视频一起把这个&帮助相当
一点。这将是永久的设置在我的工作室,我不会想要拆毁每次演出虽然……
总之,我给这5颗星,因为它是建立。

通过简•威拉德博士于2020年7月3日音乐背景:60年代以来的专业键盘手

优秀的装备。我对他们已经有两个用于4年和爱他们的方式处理重usuage。
我强烈推荐这张装备。

从印第安纳波利斯克里斯汀于2020年6月24日音乐背景:古典钢琴,带盖,教堂乐队

这站很容易放在一起。它不是很重是多么坚固。我把88键数码钢琴,和爆炸了!有时我坐在,有时我站——这很容易调整。它还带着泡沫垫防止键盘滑动。

来自德克萨斯州的鲍勃·汉密尔顿在2020年2月3日音乐背景:50岁作为一个音乐家,音响师,乐队的领导者

我买了这个作为2架站在我的手到达举行各种踏板不弯腰在地上教堂在我的吉他钻机。我又老又胖,不能弯到地上每一个小的调整,这是我的解决方案。我还买了把第6行Vetta二世下,这样我就可以快速编辑。这是我唯一能找到的重型宽度可调站。伟大的工作,如果我用键盘,我很兴奋。我以前玩键盘和一个最终支持顶点+站20 +岁。

优点:这是一个非常沉重的责任和非常灵活的宽度和高度。它将很容易支持重88键键盘如果需要第二个键盘完全可调顶架上。我不认为它所有它的昂贵。的顶级调整角度,深度和高度。金属强和厚……你可以指望这站着一头大象。

缺点:组装是有趣的阅读说明书,哪个方向较低的调整旋钮的脸。将组装后很容易,如果你想要的。顶级的高度调整飞行员洞安全锁,但是没有足够的穿孔在搜寻我所需要的高度。然而,锁定旋钮把死亡之握在垂直轴上,我有信心不会滑动。移动这个站在演出演出将是一个痛苦的方方面面……安装、拆卸和运输。笨重的,在很多部分拆除。

我喜欢这个站,强烈推荐它,会再次购买的任何一天。

弗吉尼亚州林奇堡的杰米9月24日,2019年

我们教会使用Nord第二阶段,但有时我们会有键盘手添加一个额外的键盘,这需要我们周围的一切,他们把自己的键盘站。现在我们都是集和北方不动。前面的键盘站和略unlevel移动。我们感谢这个,斯威特沃特快速航运!188金宝搏官网是多少

由迦太基罗伊wammack莫7月9日,2019年音乐背景:长回家乐队

伟大的站在伟大的价格担心它将足够重,它是完美的举办两个大罗兰88键。

杰夫在大急流城,2019年4月15日,MI

看着折叠Z站是适合我的应用程序。很容易组装和提供所有我需要的适应性。研究和耐用。

由托卢卡Alan Sheltra湖,12月5日,2018年动画音乐背景:声音设计、音频

这个东西是非常可靠的,与我的老“X-Stand”是“wiggle-free”。
如果你需要更稳定的支持你的键盘,把这个站!伊恩,我的销售代表是很有帮助的,通过确保所有很好。爱斯威特沃188金宝搏官网是多少特!

通过从查尔斯顿戴夫,SC 10月28日,2018年音乐背景:演奏音乐的音乐家

我正在寻找一个站,可以充分支持两个实质性的键盘。后一个老x-stand崩溃和一个洞在我的一个董事会,我决定投资于更重型的。这个站是坚如磐石的支持哈蒙德XK2(35磅。)在顶层和雅马哈S90(51磅。)在较低的层。站可以调整宽度和高度和角度(顶级)。我有雅马哈在相同的高度设置为我的钢琴声和哈蒙德徘徊在合适的高度,倾斜下来大约5度。的一个缺点是折叠的站是需要时间的,如果你需要让它小的运输。我有足够的空间在我的卡车,所以打算把它折叠起来。如果你有有限的空间我建议考虑到这个。

通过从Yucaipa丹尼斯·威尔伯,2018年6月29日,CA

很容易组装和持有两种键盘的安全。最重要的是它不动摇或摆动即使很难玩。它很容易可调高度和宽度以及键盘顶部的高度和角度。我建议这个站到每一个人。一个缺点是,它可能提示如果删除键盘底部的第一。总是先删除上面的键盘。除此之外,我强烈推荐这代表它的强度和稳定性。

从佛罗里达dave11222 6月5日,2018年

首先,斯威特沃特不188金宝搏官网是多少能被打败!我收到这站迅速,它建立在15 - 20分钟,w / o阅读的方向。我知道,这是男人的不读,但是说真的,如果你有任何人才都很快。我把旋钮背面可以使他们是我设置的方法。我的电脑显示器(24”)是第二梯队,完全在眼睛水平。这是一个非常漂亮的站在一个伟大的价格。

欧内斯特·安德鲁在FL 4月11日,2018年音乐背景:假的音乐家

这是一个我们做站!我想他们基本上认为的一切。它看起来很结实,我的SL88内克塔P6控制器惊人。不能说足够的能力完美的高度设置我的阶段。荣誉!

来自Hoxie AR的克莱德·布朗。美国4月3日,2018年音乐背景:退休职业音乐家,声音Eng生活,工作室的主人。福音组的成员。

这是最强有力的站我曾经买了。的确需要一段设置它,但我穿上它轻松地举行。我需要一个足够低的坐下来。“变老”的一部分。一旦我得到它调整我将标志着它,它不会花这么长时间来设置。谁需要一个强大站调整坐下来。这是立场。

2018年3月21日的格雷林Pingel WI 音乐背景:职业音乐家、活表演者、录音工作室的主人

这站是固体,可调,也正是我需要做的。我买了录音室的所以我不会移动它。非常稳定。

由专业音乐家的林地,TX 10月17日,2017年音乐背景:专业的音乐家

我买了这个演出很重88键盘底部架和一个相当沉重的76注意键盘上。这是一个坚实的站不摆动或摆动或岩石。它折叠起来好和容易。这是一个伟大的站在伟大的稳定性,尤其是重型键盘以及伟大的可移植性。它看起来很不错。迦勒Lowrey一起工作是大有裨益的,非常有耐心,帮助和知识渊博的。我命令这只大演出前几天,它在时间的聚会!188金宝搏官网是多少斯威特沃特是一个运行良好的一个例子,伟大的美国公司!我已经购买从他们自1990年和已经满意可靠的产品和他们所提供的特殊服务。和谢谢你查克保持目录来了! I read them cover to cover!

斯威特188金宝搏官网是多少沃特客户在10月2日,2017年

我拥有5这些多年来和绝对穿他们从道路使用(我使用两个)。我用很重的,高质量的键盘和我非常粗糙的装备……我不会使用任何但这些站。与其他因素无关。

从新罕布什尔州约翰尼Ack 9月27日,2017年音乐背景:35年演奏音乐的音乐家

不让我惊讶。5年前我买了一个,但是离开了乐队,并出售它。通常情况下与我们音乐家,我回来到一个乐队,需要一个站。我甚至没有去看别的。单引号和双“X”是不要剪。他们摇滚,不一致很好,基本上是脆弱的。这在方方面面Z-STAND神奇的110%。非常稳定,部分,每一个人,是完全一致的。非常快速和容易拆除。可以保存吨的重量,不过是轻量级的键盘。 I originally owned a Yamaha S90XS synth, about 60 pounds, and a portable Hammond on the top with out incident. I now own a 12 pound Yamaha P115 88 key digital and an 8 pound Roland V-Combo. Even though these are very light the stand ... well Stands strong. if you are a gigging musician like me, or a home body playing for yourself and family, this stand is a must. just buy it and you'll see.

通过从新罕布什尔州约翰尼Ack 8月31日,2017年音乐背景:演奏音乐的音乐家35 +年

没有一个更好的突出了两层键盘。肯定需要几次弄清楚如何有效地把它拆掉,但让我们面对它拆除添加一两分钟是值得的杰出的价值和得到与此站。我用一次bungi顶部和底部的腿都折叠起来,仅仅删除顶级我不螺钉在中间的“距离”撑在顶部或底部。只是一个完美的,单位。好,我甚至不知道我为什么这样说,但你显然希望重你的键盘在底部,钢琴,等和你的打火机一个字符串/角以外的48个关键合成器等,这是一个100%的赢家。漂亮的舞台上!

艾德·约克姆县发生的夫人湖,佛罗里达州在2017年6月7日音乐背景:键盘艺人

我最近买了键盘从淡水站。188金宝搏官网是多少一如既往发表的前一天我的预期。到目前为止我已经使用这两个演出。这是很值得购买。我在两个站在演出。他们没有工作好。这使得我的工作很多,看起来更专业更比我本使用。很沉重的责任,东部和快速分解和使用。

201188金宝搏官网是多少7年4月19日,由斯威特沃特客户

绝对坚如磐石,容易组装和分解,之后没什么说的对。

通过从威廉斯波特丹·狄龙,PA 4月2日,2017年音乐背景:古老的岩石和辊从过去。

我的2他们!这站是迄今为止最稳定的站我用。它是优雅简单,提供大量的适应性。由于沉重的钢结构不是最轻的站携带但是它提供了一个非常坚固和安全平台为你昂贵的键盘。

2017年3月29日,由拜伦Tanksley

这是一个很好的键盘站。它是坚固耐用足以容纳两个键盘一直是我的梦想。斯威特沃特感谢188金宝搏官网是多少让我的梦想成真,这华丽的站。

2017年3月21日,由德州凯斯·霍尔特音乐背景:键盘手,声音工程师

我以前用这个在我的教会,所以我非常熟悉的时候我买了我自己的。很容易和快速设置和分解。高度调整涉及销适合的预钻孔孔垂直结构为主要成员和上层。这是重要的,原因有两个,不会滑动部分如果不够严格,是不可能得到双方的广场。
我选择这个站的主要原因是,调整高度和宽度没有设置在演出时去完成。只是流行弹簧捕获,折叠起来,扭转过程设置。
甚至非常坚固和稳定与沉重的键盘。我看过其他评论抱怨引爆了一个键盘在顶层。如果你把你的重键盘的主要前沿附近层和支持* *之前加载任何上层不会提示。在一个配置我运行一个雅马哈P250 88键加权操作数码钢琴在主层和KORG三一76键上。在另一个我运行一个Arturia KeyLab 88加权操作键盘控制器的主要层和雅马哈DX7或先知6上。配置都是岩石稳定。

通过从普莱西德湖海沃德Armstead, FL在2016年9月30日音乐背景:生产/打击乐器乐手/音频工程师

很棒的键盘站! !对我的家制作工作室。

由E红色来自加州的洛杉矶1月2日,2016年音乐背景:独立音乐制作人/音乐家

非常惊人的和令人惊叹的产品,再次感谢甜的水,产品非常耐用,坚固,非常强大,并保持我的KOMPLETE S88平衡和稳定,没有任何倾斜

的乔恩·r·达拉斯,德克萨斯在11月27日,2015年音乐背景:音乐家/录音师

很容易组装! ! !我很惊讶地发现腿刚好和点击到位,之后附加支撑梁用了不到3分钟!伟大的质量和非常坚固!爱它! ! !

斯威特188金宝搏官网是多少沃特客户11月10日,2015年

重型折叠站帮助创造更多的空间。现在站我很舒服玩我的键盘。

2015年9月28日,Synth大师从美国

我有两个站,我就下令从斯威特沃特第三个是我的新作品!188金宝搏官网是多少这些是坚如磐石,最重要的是他们是稳定的。没有震动或摆动像你从其他站。他们是可调,可以容纳许多风格的键盘。当你自己的昂贵,它支付来保护你的设备从一个坚固的站,不会来推翻。我没有使用过他们在舞台上他们却做折叠好,不占用太多空间,如果你打算带他们去演出。

得到一些!

由莫里斯顿克林特McLain佛罗里达2月18日,2015年音乐背景:职业音乐家和家庭工作室录音

这个站是很容易建立和拥有我的键盘。
很容易组装和分解迅速,适应任何高度坐站取决于你的游戏风格。我用这个在我家的录音室。

201188金宝搏官网是多少5年1月15日,由斯威特沃特客户

很好的键盘站! !有一个视频,帮助你设置它!很结实!我用它来Korg科隆诺斯底和我第一次键盘上。=)我非常满意,满意我的购买。我推荐它

3月的鲍勃·伯曼德尔CA 10月28日,2014年音乐背景:职业音乐家,现在兼职

键盘站需要稳定,首先,和可调,这样你就可以把你的键盘在哪里最适合你的演奏风格。两层站在舞台上非常稳定,坚固足以站的抛出的卡车,并完全可调的无数调整旋钮。也相当小的折叠下来,不是很小,但足够小,让它在一个小型掀背车。
这个婴儿五颗星

通过从罗切斯特Daryl狙击兵,佤邦于2014年9月17日音乐背景:专业的键盘手,40 +年

大脑处理寂寞芳心超过20年。伟大的人,总是引导我最好的装备。这站岩石!不像我以前难以设置“Z”风格的立场,和更健壮。谢谢,布莱恩!

通过从桑迪帕特里克·朗格弗德,但美国5月28日,2014年音乐背景:歌剧歌手,歌手

这个站是炸弹。我爱它。我Privia键盘适合水平和我主板上把所有的咏叹调齿轮上面。

斯威特188金宝搏官网是多少沃特客户从美国在5月21日,2014年音乐背景:职业音乐家

这是最好的站在那里,。伟大的大键盘和球员与他们粗糙!这都是我用。我在我的第三个,但那是长达十年时间!

通过从吉列里克Mendyka Sr,于2014年3月5日,怀俄明音乐背景:录音工程师,住声音,18年以上专业的人声,吉他,和钥匙

孩子,当你看到所有的评论关于这个站的难以置信的力量…他们没有说谎!我遭受了多年来在舞台上有着高定价的尖顶站,动摇你每次呼吸。不与KS7365-EJ走上舞台。这个东西是体壮如牛,我留下了深刻印象,也易于设置和合身的部分。甚至不惹什么事,无论什么代价。这像卡斯特,让你的“最后一战”(你需要购买)。

通过从hialeah豪尔赫,2014年1月21日,fl 音乐背景:爱好

这是设计的很好
在这个站安全是最重要的一点
减肥健身,
尺寸非常可调

我很高兴……谢谢

由院长从威斯康辛州在2013年12月9日音乐背景:音频工程师

最好的键盘站我所拥有的!

201188金宝搏官网是多少3年11月20日,斯威特沃特客户

这站对我们的敬拜是完美的空间。

由T。摩根从菲尔德小姐于2013年5月27日音乐背景:键盘手,录音工程师

花一分钟来组装,但,在合理的时间逃跑。
强壮如牛。完全可调的,紧凑的存储。买的手提袋。非常轻便。小心点你的左、右输入。在二氧化钛x 73输入非常靠近手臂的支持,所以我用直角1/4 "音频电缆更好的结算和更少的机会损坏输入。也为你的电源线可能是个问题。调查一个直角电力电缆。记住这些问题可能只指的是二氧化钛x73。可能不是太坏的主题76…

由太Greenwalt罗杰。弗农,IL 2月8日,2013年音乐背景:职业音乐家

快速服务——伟大的价格-斯威特沃特随访。188金宝搏官网是多少正是我所期待的来自这些家伙。

从伟大的巴林顿,史蒂夫·r·马于12月3日,2012年音乐背景:多媒体制作

非常满意这个立场。容易组装,非常坚固。更重要的是,它可以适应范围广泛的高度,宽度和角度,使它适合我们的工作室。看起来不错。

由密歇根西南部斯科特·m·罗斯11月13日,2012年背景:音乐作曲家

最好的钱。

通过从贝城迈克Rathbun, Tx。美国在2012年1月30日音乐背景:过去的老教堂音乐总监。现在家里工作室。

重型和固体。我爱的方式,它打破了栈为旅游形式。是足够小的躺在我的地板。

2012年1月18日通过射线来自俄亥俄州的布鲁克斯音乐背景:职业音乐家/制片人/工程师

这个站是太棒了!我需要一个好的研究代表数字记录器用于跟踪,这是一个支持。硬盘录像机非常可靠,但必须放在一个平面上的支持,才不会跳来跳去也可能跳过和你不想要的,所以,当这只花了约5 - 7分钟把它在一起,我知道这将是一个! !很棒的旅游时构建质量和非常耐用。不要被模仿,买一个台上站! !

由哈里森·阿甘从里德的城市,2011年10月20日MI 音乐背景:鼓手,吉他手/最近成为崇拜的领导人

这个键盘站核心是多么坚固的!我很积极的可能持有一头大象。也许不是大象,但非常坚固。强烈推荐这个立场。

由拉梅萨Josh Garlow CA 2011年10月13日音乐背景:崇拜领袖

这是最好的,我所拥有的强有力的站。事实上,我有两个。在舞台上看起来不错。

201188金宝搏官网是多少1年8月27日,由斯威特沃特客户

你知道每一个现在,然后你遇到一个很便宜的但是你的齿轮最终永远的拥有和使用,因为它是如此好吗?这个站是吧!
我必须告诉你,这个东西就像一块石头。我用它为我的小Phatty和MPK61(两者都有一点的重量),我知道他们会非常安全。
当你第一次得到的东西都是折叠成这个奇怪的小钢的质量,你不能完全明白,但只要按照说明,你会好的。
同样值得注意的是,高你有一切调整越稳定。我有那么低就去,因为我的工作在箱子里,当它在最低设置站后面有点重,但只要你不尝试推动它在哪儿也不去。
我所知道的是,这是我用来转移话题的代表。

罗伯特从CA,美国1月25日,2011年音乐背景:活跃的专业

这个东西是建立!非常坚固,没有震动,甚至在地毯上。我使用一个罗兰700 gx底部和库兹韦尔生物之上——这不是挑战的组合。一个警告……小心你的膝盖,如果设置低和接你的脚移动的时候恐怕你脚趾存根。它的钢获胜。一个沉重的键盘设置你不能出错。

201188金宝搏官网是多少1年1月24日,由斯威特沃特客户音乐背景:崇拜导演,作曲家,演奏音乐的音乐家

我用这个站在88 - 55磅rd - 700 - nx的关键。即使我锤击键,没有摆动的立场。设置/销毁时间小于5分钟。(多一个X-stand,但steadyness站是完全值得的。)我再也不想再使用一个X-stand。* *我强烈推荐Z-stand的袋子。* *它使交通非常容易。没有袋子,这有点笨拙的倒塌的部分。

德克萨斯州玛法的肯尼斯·琼斯(玛法的灯光)5月7日,2009年音乐背景:今年63岁,15岁以来一直在从事专业。

我已经购买键盘代表30年(因为我blewup哈蒙德A100)。我用一共有三个x样式代表过去的20年里,永远不会满足。虽然初始设置是很紧张的,在几次的试验设置,比如,真是小菜一碟。absolue稳定!库兹韦尔SP88在底部,Studiologic VK61第2层,和罗兰JunoD第三层没有任何问题。你可以设置一个卡车!蛋糕上的糖衣,一切都符合自己的袋子。感谢迈克尔,他帮助把它一起给我。

丹•洛根从迪克森,美国12月19日,2007年音乐背景:专业爱好者

我刚买了一个罗兰幽灵x6和sh - 201键盘,这个东西是一个一生的投资。坚实的站。不摆动,很可调。我很高兴我花了额外的钱。

通过从Mpls鲁迪的单身汉,MN 5月31日,2023年音乐背景:专业的音乐家

伟大的键盘站。非常可靠和容易运输!

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="405559">

202188金宝搏官网是多少2年4月25日,由斯威特沃特客户

非常Satble

通过从Strongsville斯科特·麦克莱恩,哦,1月20日,2021年

我买了这个替换基本X-stand站在我的工作室。我想要,MODX7 System-8,这不会动摇。这肯定符合要求。它引发了足够高的,你可以舒服地坐在前面,你可以调整上臂,合成器可以轻松地玩,和控制面板可以很容易地看到和。很多站按住键盘的方式他们可以播放,但控制尚不明朗。

之后,我添加了两个可用的附件托盘上臂,我用来把两个小合成器,JD-Xi和重修表面CS。这些是绝对不结实,摆动时有点玩(毫无疑问,因为每个单个post)举行。公平地说,这并不是他们的目的是如何使用。如果我这样做,我可能会买可选的第三层的两个托盘,并将较小的合成器并排。

一个警报/警告:如果你有一个重synth在上面,一个打火机在底部,可以非常不安定的,向后站!前面的腿扩展向球员和坚如磐石的那个方向,但相同的腿只伸出几英寸垂直帖子后面。如果你有一个重synth在顶层,它不会花费太多的把整件事了。我把一小块木头,涂黑,和用它去后方水平和地板上,给它多一点支持向后——你可以看到我的照片。这肯定有帮助。也许你还可以扩展的脚在后面几英寸达到同样的效果。

我一直使用这个站现在一年多了,和整体我很高兴。如果可以选择,我一定会再次购买它。

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="298447">

通过M Nordang佤邦。2019年9月29日,国家音乐背景:鼓/低音/吉他/ keybords超过50岁。

伟大的站

通过史蒂夫蓝鸿恩Pa 3月6日,2018年

我买了KS7站购买后不久Crumar魔力(神奇的乐器)通过我的销售代表鲍勃Mondack。我也使用Korg二氧化钛很重。这站很容易同时支持键盘和,因为顶级的KS7很可调,这使得二氧化钛所有的调整都需要完美的放置,容易达到高于键盘上的魔力。我很满意这个站的灵活性!

2017年12月13日,由内森音乐背景:键盘手

爱这个站!坚固的,我永远不会担心下降装置。真正伟大的,它提高了它的方式。唯一的问题是它需要一段时间去建立和整理。有11个独立的旋钮,必须附加/处理,它可以花大约5分钟的设置,而不是一个触发器X站在大约半秒可以设置。但是,这最终是一个更好的,第二层是奇妙的变化角度,腿不妨碍喜欢x的立场。

由约翰·桑切斯从布朗克斯,2017年8月17日,纽约音乐背景:音乐家/作曲家斯威特沃特的客户188金宝搏官网是多少

一个伟大的站!
任何键盘容易装配、调整大小、重型施工。
KS7365-EJ Pro重型站就是。

201188金宝搏官网是多少7年6月22日,来自密苏里州斯威特沃特的客户

当然高质量但重一吨。

由库尔特Schwedler从枫树林,MN 4月17日,2017年音乐背景:25 +年崇拜的领导人

这舞台分层键盘站是高质量的,我现在我的键盘已经积累了多年来的首次。我没有给它一个5的唯一原因是,我认为“折叠站”翻译成你能容易演出。作为一个单独的层站没关系,但是作为一个双层站你有许多的作品成为一个装载运输。以为我被宠坏的多年的经验与一个终极顶端站,方便移动。除此之外,这个站是言过其实的优秀的,稳定的,坚固的,安全的,再加上它“看起来专业”,,这有利于我在敬拜中使用设置。

斯威特188金宝搏官网是多少沃特客户2月10日,2017年音乐背景:40岁。舞台和工作室

我想我已经尝试每个站包括一个让自己的黑铁管和配件我渴望实现稳定。重地狱,花了15分钟将所有配件螺丝在一起,并不是最时髦站至少可以说。这个KS7365恰恰相反。虽然不是轻如X-stand,手提袋是非常可行的。我把它放在我的滚动道路情况下只要有可能,但是当你必须带着它,它不仅仅是可控的。设置了一点,但一旦你这样做一次或两次,它变得非常容易。它有一个共同点,我自制的站是稳定。这站就是其中之一,如果不是最稳定的我有玩过。我做了一些插件。我同意一些评论家评论对第二梯队的渴望能够进一步。 I found that the keyboard on the 2nd tier obstructed my view of the bottom keyboard. If you try to move the bottom keyboard toward you to compensate for that, it starts to want to tip right into your lap, or in my case to the floor, since I play standing up. I solved this by simply making two rectangular blocks out of wood about 6" long with a 1/2" wide by 2" long slot cut down the middle. I removed the two plastic caps at the point where the arms hinge under the bottom keyboard and inserted the blocks. The piece is slotted so it will slide past the hinge bolt. I covered the part of the blocks that stick out by wrapping them with black Gorilla tape. I put a piece of foam weather stripping on top of each block and now have a 4" extension to be able to pull my StudioLogic SL88 right where I need it. I simply pop the blocks out at the end of the gig and reinsert the plastic caps.The 2nd level holds my Roland VR-09 super steady even when I'm doing heavy swipes on the organ settings. I had a KSA7500 universal 2nd tier hanging around from an old X stand and it fits perfectly in the square tubes of the 2nd tier to create a 3rd tier for my Yamaha MX-49 synth.

我不能说足够好的东西关于这个立场。持有你的钥匙紧没有摆动即使你敲打键盘上下。分解并很好地符合重型手提袋。它就是你期望从一个键盘站在一个非常合理的价格。

斯威特188金宝搏官网是多少沃特客户从洛杉矶6月26日,2016年音乐背景:专业的音乐家

伟大的固体站!这个站是超级结实可靠。

这站是伟大的在舞台上!感觉比任何更坚固的“X”站在过去我用。然而,运输和设置非常激烈。它是坚固的,因为它是沉重的,它并不是快速轻松地拆除。如果你在每天晚上演出这可能不是最好的两个分层支持你,但是如果你在演出一周一次或更少的这个站是太棒了!

4.5星因为这站就是一切承诺但可移植性不是最好的旅游情况的音乐家。

从质量和WM VT 3月2日,2016年自1963年以来音乐背景:玩了

我给它4.5星,因为它不会适应所需的宽度,建设好,刚性一旦一切都舒适的很好。分解运输。我不得不去台上的网站,以确保我装配正确,没有包括指令。他们的视频非常好。

我需要的是20英寸宽;它只会调整到22英寸宽。我可能要做一些kreative库特。

罗伯特•博因顿李子从海滩FL 2月4日,2016年

这个站是沉重和坚固的可以。告别键盘摆动——我所拥有的最强有力的站。顶级的最低位置,你有一个近乎完美Hammond-style设置,与上面的钥匙上面8英寸左右键底部,促进舒适玩一次的董事会。

大会是温和的恐吓,但只有一个或2轮,你的setup和teardown速度迅速增加。我买了这个袋子,一切完美契合,虽然袋+站很重。

有一个缺点:整体站的高度不一样可调。在最低设置,底部钥匙将远低于钢琴高度,需要高度可调凳子上(如鼓的宝座我使用)让你的腿下。你会感觉,也许看起来很傻坐在如此之低。问题是,第一个切口高度约为8 - 10”钢琴高度高,远高于标准。这将创建一个不自然的坐着的时候玩的位置。不过,解决方案是相当可行的:钻自己的中间“缺口”。这最好通过钻井是一个小导孔,然后逐步扩大,孔大的钻头。只花了我大约10分钟使用5位。相对最低的问题解决了,我肯定一个业余的工匠。

这个词大量出现在这个产品的标题是有原因的,但不要让这种劝阻你。为你额外的拖着努力,这个站是无与伦比的的性能。强烈推荐。

最后,确保你总是先把底键和删除它们。物理定律仍然盛行,这个站将提示如果你不小心。

从莫斯科,克里斯ID 12月6日,2015年

无疑经受住了时间的考验,坚如磐石。我唯一的诡辩是这里的描述似乎表明宽度的2层是独立可调的,据我所知,它不是。如果你想把一些东西只有37键上有88的东西,它可以是有点尴尬。我买61(或73)上的88是奇妙的。

由艾伦梁从旧金山10月7日,2015年

我用这只在一个演出到目前为止(设置在家里后,就像一个测试运行),但是这精彩的表演。我玩一些演出站,这个站适应高度刚刚好。第二层不提高高达我想,我可以用更多的空间之间的顶部和底部键盘,但是我可以访问这两个键盘。感觉坚如磐石,提供大量的地板空间我的踏板。我唯一的警告是,我确保我有足够的时间来设置它;这不是长或复杂,但它确实需要一些比刚烙开立x-stand深谋远虑。考虑,你就会没事的。我也保留判断损坏的旋钮;他们似乎耐用,但我们可以看到他们如何做支架,销毁后大量的演出……

由迈克尔•哈蒙德Massura从2015年5月6日音乐背景:音频是女士,工作室负责人,剧院的房子是女士

我一直看着自从我开始音乐商业,他们似乎总是惊讶我的耐久性和成本效益的产品。KS7365-EJ是一个奇妙的第2层键盘站。重量平衡是正确的并不是摇摆不定。一些大会是必需的,但它花了我大约10分钟。说明基本的所以你必须使用一些常识。你可以创造性的像我在顶层为键盘,如果你需要它不仅增加了一张1/2in 3英尺的胶合板和你有一个好的工作站上舞台或工作室使用。总之我推荐这个产品给我的钢琴和键盘的朋友和同事。

虽然从我一直打我的脚的角落的基础也许某种橡胶基地的角落,很快我将会做一些关于这个,因为我不能忍受触及我的脚了。腿是非常轻微,我一直打在我的脚。我想我需要更加谨慎。但是当我做了我的脚KS7365不会移动甚至不棚屋所以它像一个坦克供参考。4.5星的橡胶覆盖前面的基础如果可能的。这将是伟大的!我不介意付更多的钱如果这是一个选择。

布莱克在休斯顿,德克萨斯州美国2月18日,2015年音乐背景:崇拜带钥匙的球员

我使用一个X-stand多年,总是担心它会突然像一根树枝。因为升级到这个Z-stand,我可以说它是坚固的!没有运动或跳跃时抨击那些低音。唯一的障碍是2层的旋钮。告诉斯威特沃特之后,他们给我188金宝搏官网是多少更换所有的旋钮。伟大的产品和服务。谢谢你斯威特沃特。188金宝搏官网是多少

通过从代顿院长b,哦,7月14日,2014年

我用这个站在几个不同的全尺寸数字键盘,甚至当锤击键站不摆动。设置/销毁时间不到10分钟。我可以练习,不到5分钟,但是没有着急。作为另一个评论家说:“我不想再使用一个X-stand。我没有拿袋子,但是在试图用手移动块,后来发现自己的包,我强烈推荐Z-stand的袋子。我应该阅读评论更好!我唯一的抱怨是塑料头螺丝拿着块不觉得他们在一起将会持续很长时间。一个甚至是胶合弯曲的螺栓,所以恐怕收紧了太多,打破它!我想知道斯威特沃特将取代188金宝搏官网是多少它吗?

通过本来自密苏里州美国2月18日,2014年音乐背景:崇拜领袖

伟大的站整体,尤其是伟大的美元。它的固体和精心设计。这个东西将滥用。只有负面的:如果你使用一个小键盘(MicroKorgXL或类似的)上,你不能设置宽度独立的立场。一,也是如此。换句话说,你不会想要一个低88关键站如果你缩小以适应一个MicroKorg上。

这是我第一次与斯威特沃特事务。188金宝搏官网是多少这些人哒炸弹。客户服务很好…他们知识渊博,他们跟进,跟进。谢谢你,伙计们!

通过从那不勒斯丹,2014年1月17日,FL 背景:音乐的音乐家

优点:
坚固的,非常坚固。没有廉价的金属。爱它!
一旦你找出如何展开,拆卸和重新组装很简单。
最好的两层站我欠(或任何站),到目前为止。

缺点:
我最大的关闭按钮。没有质量,但事实上他们不得不垃圾邮件在他们每个人他们的名字。添加一个大的混乱,我不能忍受。我碰到一个标志,但它显示了通过,将几个应用程序,然后你会剩下一个闪闪发光的黑色旋钮而非平面如果你走这条路。PVC清洁了信件,但说真的,他们想什么呢?你想要你的名字,一次怎么样?不是13旋钮。

最低高度可以/应该去另一个2”我认为,但站制造商认为每个人的6“高我猜。好吧,我们不是。如果你站当你玩,这是足够低了但我从未站和玩耍,替补席上的最大高度仍然使我希望台高出几英寸或站将会降低。是板凳上可能是我轻松工作的最大高度踏板没有不断延伸,我不得不说的站可以轻松取得了低。

和其他人所说的顶级和缺乏调整提高第二高。我有在马克斯和无法想象任何降低。

只有8胶垫条。添加几块钱和两倍。我没有犯错的余地,一个是毁了所以不得不削减一半。有了另一个2至少有利于后面的第二武器面前你以来第一次董事会如果你有它撞到了后面,你确实会刮伤你的董事会不择手段,只是将它不断。

仅此而已。可能听起来像我抱怨,但只有旋钮和我只扣除半星。公司不认为事情经历。怎么会有人看着的成品,而不是看到的他们的名字看起来到处都是超越我。不喜欢问题以来,各地人们仍然会问你什么是(除非他们有一个)。抱歉,但这真的是一个眼痛和不习惯,我也不会,直到我得到平面的黑色。

我很高兴一切都好包,因为盒子里看起来更像一个豆袋。站虽然不是一个划痕,所有的地方都好。

尽管这可能怎么读(累了),我很满意我的购买和强烈推荐这个站(和一些PVC清洁;)。

通过从188金宝搏官网是多少Nashvilel斯威特沃特客户,TN 1月10日,2014年音乐背景:现场音响工程师

这是一个神奇的硬件。非常坚固,非常灵活的方式您可以设置第二个层。

我说4.5星而不是5的唯一原因是,我觉得他们应该允许低高度的设置。当你坐下来第一级仍然可以只是有点太高了。这是rectifided通过钻探更多的洞底腿高度,以便有更多的选择。只希望将这种方式来自工厂。

他们说这是可移植的,但在现实中,我不想组装和拆卸定期。需要几分钟设置/分解。然而,对于家庭或工作室使用,我不能想象一个更好的设置。

由马特·凯瑟从美国10月16日,2013年音乐背景:演奏音乐的音乐家

容易组装,坚实的站,非常灵活的配置。只是有点尴尬的运输(比我的老号顶点列。

通过从克莱姆森拉里·布兰顿,SC 8月7日,2013年音乐背景:职业音乐家

很容易处理,足够的空间,非常强壮

通过从Turtletown史蒂夫·汤普金斯,于2013年5月20日TN 音乐背景:录音师和生活事件的声音

买了两个,一个用于雅马哈CP33阶段钢琴和一个用于我的Presonus Studiolive 16.4.2混合器和MacBook Pro设置。设置后有点费时但组装和dis-assemble几次它不坏。我确实感觉非常满意这个站的稳定和力量把我的昂贵的设备。搅拌机/电脑设置需要添加(x2)创建一个货架上我不能调整狭窄得足以容纳这个设备。了半星由于一些小的硬件质量问题。我不得不接触几个装配螺栓来纠正一些有缺陷的线程,但一旦完成一切都好。

由大卫Mondebello从新奥尔良,洛杉矶。2012年12月28日背景:音乐的音乐家

我所买的最好的两层站。键盘是安全的,舒适的位置。大量的脚踏板。这就像一辆坦克!

由罗宾·康利来自阿肯色州西北部的6月27日,2012年背景:音乐爱好者和16年的正式的音乐课程。

我永远不会担心站我的键盘设置。这个站是固体。这是一个有趣的实验首次把它在一起。所以组装时间会更长,但我内心的平静。我强烈推荐这个站。

由美国188金宝搏官网是多少斯威特沃特客户6月6日,2012年背景:音乐的音乐家

我拥有许多不同的站从便宜的到非常昂贵。这是迄今为止最好的,简单,麻烦少了两个键盘总重量超过120磅。我强烈推荐这个站在任何人身上。

史蒂夫·从亚特兰大,乔治亚州在2012年4月11日音乐背景:记录和现场乐队爱好者

这是一个很好的代表。它是非常稳定的,即使我的厚老沃立舍EP在底部和中型MIDI钻机顶部。你必须协商不好翻译汇编指令,但什么是新的吗?我召集了我马上,几分钟内使用它。我还没有试着将它分解为演出,所以我不确定这是如何工作的。但是我很高兴惊讶于质量。

由迈克尔·施皮茨从纽约8月2日2011年音乐背景:作曲家/吉他/低音鼓

想要一个三层键盘站解决方案不是一个人字形,我几年前我卖一堆旧的键盘,硬件音序器和鼓机。
人字形占用太多墙壁空间,除非你有wallspace备用。我不…
调用置于舞台后,我还买了第三层扩展有四个胳膊,看着“豪华2层”和“吉米”它适合在这个站的第2层,根据科技的“项目”的方向,通过塑料帽和扩大与油管连接部分紧密。嗯? ....是的....

这工作好! ....我put lighter, more plastic keyboard(s) on that highest third tier. Would not put a "heavy" keyboard up there but, still....it feels very very solid, just the same.

也是伟大的关于这个站(和我买它的原因)你可以调整高度最低的和最强的层,这样你就可以坐着玩。试着和你的3层X-stand .... fuhgedddabouddittt ....

202188金宝搏官网是多少3年4月13日,由斯威特沃特客户音乐背景:长期职业的音乐家

坚实的构建,相对容易设置和崩溃。
我希望有更多的高度调整选项2层。
我希望有一个较低的高度的选择。
总的来说一个好站的钱……

从有些马克斯CA 3月29日,2023年

这站支持我的键盘(下架)和我的midi控制器(上面)支持很好和爱的倾斜选项顶层架子上。它确实需要一些腿调整作为我的膝盖支撑梁底部经常联系。震动存在,当我感到我的燕麦在键盘上。

\n
\nI have a heavy touch, and when you compound that with the weight of the SV1 that becomes significant factor in finding a suitable stand. The 400lbs capacity of the On-Stage KS7365-EJ is not overkill but a requirement when you consider the investment of what you will most likely place on it. Ive found it to be rock solid.
\n
\nIm considering buying another one for a Rhodes. I would think that would be about the ultimate test.", "sir_rating": "5.0", "sir_name": "Ron Flack", "sir_whereareyou": "Sunny Canton Ohio", "sir_background": "Arranger, keyboard, engineer and cowbell expert", "sir_keepanonymous": "0" }, { "id": 24841, "store_items_review_id": 370276, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-bbe0a0777b6ac1474e1ee7e91b5171d05498a3c0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-c63488595e4711a55d6f0b4edab72779bbf3a0f0\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwODIxMDgyOTI5LXBocGZuZWFiZS5qcGVn", "sir_title": "Two tier keyboard stand", "sir_comments": "This is a heavy duty keyboard stand that is sturdy. Easily put together in 5 minutes. It supports both of my digital pianos.
\nI have purchased many items from Sweetwater and as always, the dual piano stand was exactly as the description indicated. Very satisfied with the piano stand and the service I recieve from Sweetwater.", "sir_rating": "5.0", "sir_name": "", "sir_whereareyou": "", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 22834, "store_items_review_id": 359992, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-dd6de34cd55a381e276f755253c46661df534832\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-5892836c3872520174ac22569be53cf8d4ea5713\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNTI1MDIxMTA2LXBocDAwcGhrdy5qcGVn", "sir_title": "Seriously good stand", "sir_comments": "I admit to not being a big fan of the On-Stage brand, mostly because of the numerous cheap mic stands Ive had to use that end up falling apart after too little use or whatever.
\n
\nThis stand more than makes up for those experiences and lets me know they can make good gear and, in this case at least, the best Ive found!
\n
\nI had previously bought the Hercules KS410B stand, thinking that must be a clearly superior product to anything by On-Stage. I was (and am) somewhat disappointed with that product; it works and it adjusts easily enough, but its not nearly as steady as Id like and it doesnt feel all that road-worthy.
\n
\nThis On-Stage stand, OTOH, is SUPER solid, folds up very compactly, and is very lightweight for how sturdy AND portable it is. I also got the gig bag with it, which Ive found to be essential (and also a nice extra bag for extension cords and such) which is also very solid and still looks brand new after a month of regular use. Mind: This stand is neither small nor lightweight, but for how solid, well-built, and intelligently designed it is, one could have it a lot worse!
\n
\nA couple of minor complaints: One of the bolt knobs spins very easily on and off its post (very nice) but the other is a little stiffer, making it take longer to disassemble and reassemble the stand (by less than a minute, but still). Also, setting the height adjustment is easy to get right with the detents on the legs but difficult to find right where the detent is. Also, I would definitely _not_ want to adjust the height with anything heavier than a SK-1 mounted on it. Not that one should be doing that anyway, but that is a minor point in favour of the aforementioned Hercules stand. In any case, the quibbles still arent enough to deflect a solid 5-star rating from me!", "sir_rating": "5.0", "sir_name": "Walter Davies", "sir_whereareyou": "Glendale, Arizona", "sir_background": "Composer\/arranger, classical & jazz, piano\/keyboards\/bass\/cello\/&c", "sir_keepanonymous": "0" }, { "id": 20106, "store_items_review_id": 347398, "media_type": "video", "thumbnail": null, "media_path": "https:\/\/youtu.be\/L-FQY1c-YVs", "sir_title": "Heavy Duty Construction, The Best Synth Stand Ive Ever Used!", "sir_comments": "I couldnt be happier with my purchase of the KS7365-EJ Folding-Z Keyboard Stand and 2nd Tier. Im using the second tier for components like a mixer, audio interface, headphones, and reading materials. The stand is made of heavy duty steel and doesnt move or sway when playing. I will definitely buy more products from \"Onstage,\" when the need arises. Excellent construction keyboard stand. Highly recommended. Contact Connor Smith of Sweetwater for more details.", "sir_rating": "5.0", "sir_name": "Timothy G. Slazyk", "sir_whereareyou": "Grand Island, NY, USA", "sir_background": "Im a guitar and piano enthusiast but the Sequential Rev 2 is my true love. I come from a family of musicians who have been my inspiration, especially my father, Walter J Slazyk, a phenomenal keyboard and guitar player.", "sir_keepanonymous": "0" }, { "id": 12808, "store_items_review_id": 312930, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-fba99ef0834b3961d3cb7971e36f56431ccb8fee\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-d1941e5ea0a1a0c22c0776d4ce551730e9e9d4a2\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwNTEyMDcyNTMyLXBocDY3aXBwbC5qcGVn", "sir_title": "2 tier On-Stage Z keyboard stand", "sir_comments": "Its a good sturdy product, serves its purpose very well. More important is the gold standard of customer service provided by Sweetwater, and their freakishly good shipping practices.", "sir_rating": "5.0", "sir_name": "Justin", "sir_whereareyou": "Martinsburg, WV", "sir_background": "Industrial Rock\/Metal, pro level key, vintage analog repair tech", "sir_keepanonymous": "0" }, { "id": 32169, "store_items_review_id": 405559, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-2c4ec90bfcba8c8cad1ab6eef97275bc0a3081da\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-50666253f322f85427202a3a86b8715b0fad14d6\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwNTMwMDc0ODE3LXBocHRzcjJ2di5qcGVn", "sir_title": "Great", "sir_comments": "Great keyboard stand. Very solid and easy to transport!", "sir_rating": "4.5", "sir_name": "Rudy Bachelor", "sir_whereareyou": "Mpls, MN", "sir_background": "Professional Musician", "sir_keepanonymous": "0" }, { "id": 9600, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-5d4829e4d411ecda1c14785f7da669af3438a7be\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ddef5dea53b7de89fda2a91baa450e980b805cb7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzM3LXBocDJ6bjJmaS5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9601, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-407c2f08b6e7600b2305bbc054667d3e94319028\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-356c16473ca42e579bf56b4641fbb365e97d02df\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzQ1LXBocDRldGppai5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 9602, "store_items_review_id": 298447, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-424e299e8a16fe46dac93f5634cff3d975b433ea\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-7bdc231d7d7d4240f219342a99ae40aa7700da3f\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMTIwMTQxNzUyLXBocG92dGR2MC5qcGVn", "sir_title": "Rock solid stand, safe for expensive synths", "sir_comments": "I bought this stand to replace a basic X-stand in my studio. I wanted something that would hold my MODX7 and System-8, and that would NOT wobble when played. This stand definitely fit the bill. It raises up high enough that you can sit comfortably in front, and you can adjust the upper arms such that both synths can be easily played - and the control panels of both can be easily seen and worked with. So many stands hold the keyboards in a way that they can be played, but the controls are obscured.
\n
\nLater, I added two of the available accessory trays to the upper arms, which I used to put two smaller synths on, a JD-Xi and a Reface CS. These are definitely not as sturdy, and wobble a bit when played (no doubt because each is held with a single post). To be fair, this is not how they are intended to be used. If I were to do this again, I would probably buy the optional third tier in place of the two trays, and place the smaller synths side by side.
\n
\nOne warning\/caveat: If you have a heavier synth on top and a lighter one on the bottom, the stand can be VERY tippy - backwards! The legs in front extend towards the player and make it rock solid in that direction, but those same legs only stick out a couple of inches back behind the vertical posts. If you have a heavier synth on the top tier, it would not take much of a shove to tip the whole thing over backwards. I took a small piece of wood, painted it black, and used it to go between the rear horizontal and the floor, to give it a bit more support backwards - you can see this in my picture. This definitely helped. You could also perhaps extend the feet at the rear by a few inches to get the same effect.
\n
\nIve been using this stand now for over a year, and overall Im very happy with it. Given the choice, Id definitely buy it again.", "sir_rating": "4.5", "sir_name": "Scott MacLean", "sir_whereareyou": "Strongsville, OH", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 30287, "store_items_review_id": 396912, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-ed533fdb25a141a3a393b7222f66be8251856b7e\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ed147c218edb05ce3a5fe4d32643be7960662662\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjMwMzIwMTA1MzAwLXBocDBqMjVzbS5qcGVn", "sir_title": "Nice stand.", "sir_comments": "This stand supports my keyboard(bottom shelf)and my midi controller(up top) Support is nice for both and love the tilt options for the top shelf. It does take some leg adjustment as my knees contact the bottom support beam often. Shake is present, too, when Im feeling my oats on the keyboard.", "sir_rating": "4.0", "sir_name": "Max", "sir_whereareyou": "Laguna Niguel CA", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="396912">

2022年6月14日,由大卫从奥尔巴尼音乐背景:半职业歌手,领队,音响工程师。

我检查评论从几个来源,决定买的舞台KS7365-EJ工作室。我们刚刚购买了2键盘和需要一个站都适应。KS7365-EJ很容易组装和看起来坚如磐石。我有两个小抱怨。一个是它似乎有点比我想的更不稳定。到目前为止还好,但我担心它可能是不小心把灾难性的后果。一个小尺寸的变化和/或角度可能改变重心回到球员和解决这个问题。另一件事是,长腿,我倾向于膝盖中心支撑杆,当我坐下来,让我回到第一个问题。否则,它很好。如果我有沙袋腿,我会的。

201188金宝搏官网是多少9年5月28日,由斯威特沃特客户音乐背景:我在教会敬拜乐队

我担心这个站的稳定时我有点物理键盘玩B3器官部分。我不得不说,这是一个坚实的站在一半的横向运动压力比我先前的立场。

我唯一的问题是二线上的手臂的长度。如果他们可调,一切都会很好,但是他们没有。当它来了,第二层向前延伸得太远在较低的层,阻止访问显示键盘和滑块低。我把上层武器机器商店有3个“4”删除。这将上层回来,给我访问显示和键盘上较低的投篮。一旦完成,这个站将是完美的。

另一个点,最低高度被列为26英寸,但最低的棘爪实际上是29日”。我可能在腿钻几个洞创建降低制动26岁”。

从纳什维尔杰斐逊贾维斯TN 2月7日,2019年音乐背景:职业巡回键盘手

这是一个很好的,坚固的站,提供足够的稳定重键盘。第二层高度和角度可调,但支持酒吧不调整深度,从而提高了工效学这个站的灵活性。我唯一的严重投诉是高度调整的范围的主要部分z站。虽然支持列足够低进入的基础,没有孔钻为了利用锁定旋钮安全列在所需的高度。洞中钻支持列只允许最低甲板高度比标准高出几英寸高的钢琴键盘。似乎在我设计监督,制造商没有钻多洞为了让这个站更适应我们这些坐下来玩。

从2019年1月6日,由AlteNoreg 音乐背景:美国的原始

如果你需要力量和可移植性,这就是。如果你想坐在这站,下横梁偶尔会引起疼痛。

附件为笔记本电脑或音乐,但我想调整头寸超过可用的(据我所知ATM)。

顶部的横梁可以让更多的选择定位笔记本支架。

由瑞安吉尔从普罗维登斯,2018年12月17日,国际扶轮

这个站是令人难以置信的实感。非常耐用。我也喜欢,它有独立控制的高度,宽度,和角度(与x样式站)。我唯一的抱怨是,调整站有点笨重。弹簧调整将使更容易调整的高度和水平的结果。这个站你有旋钮/螺丝需要摆弄,让他们结合钢管的洞。这不是一个障碍,但如果你想要快速的调整在一个黑暗的舞台而设置,这可能是不代表你。

201188金宝搏官网是多少8年12月12日,斯威特沃特客户音乐背景:家庭录音室和演出

我正在寻找一个坚固的代表我的两个键盘在排练和演出使用。这个站是很好。与合适的组件组装容易。我使用一个雅马哈S90 XS底部和雅马哈P125之上。拥有两个很容易与小震动顶级同时执行。
我给了它一个4评级而不是5有两个原因。如果你没有经历过在一起,却需要一段时间来组装。现在,我就把它组装2层武器和加载它在我的SUV。适合容易。为演出当我有更多的时间,我将拆卸,使用携带袋子。
第二个问题/投诉我(对我来说),2层的手臂倾斜,高度调整手臂不能提到足够高去允许良好的控制下键盘。我弥补通过钻探新孔2层高度武器,提高2层2英寸。我键盘上第二倾斜,这使我很多观点较低的键盘控制。
尽管如此,我肯定会再买这个站。
与我之前的订单斯威特沃特,产品到达两天,身材很好。188金宝搏官网是多少

2018年12月9日由好汤姆·安德森音乐背景:经典、前卫摇滚经典摇滚,蓝调,爵士,乡村,原创

我买了两个,以适应各种演出和录音。在声学钢琴是古典主义的训练,后来其他流派,我被训练使用我的肩膀重量从特定的音乐段落。我也玩过器官和无数的作品。

如果我真的进入它,尤其是在一个synth钢琴,罗兹,Wurli或Clav补丁,我仍然有使用太多的上半身的可以说是坏习惯。可以接近灾难性的结果,与其他站在风中,抖得像一棵树。一个实例是打孩子查理曼大帝当顶级倒塌,我不得不扮演稳定底键盘,与我的主题覆盖Clav之上。我通过它找到,但它很冒险。

我需要一些更坚实,这符合该法案。用它第一次在上周五和它很稳定。对于大多数应用程序,这将是我去站。

重,需要更多的建立和拆除时间,大手提袋是值得的钱。

我唯一真正的掌握是看着站KSA7575通用键盘麦克风附件栏并不适合在酒吧的支持。另外,我可能会需要一个新的附加我的IPad。

否则,荣誉台上!

201188金宝搏官网是多少8年5月28日,由斯威特沃特客户从西雅图音乐背景:音乐家、制作人、工程师

2键盘代表我的工作室。我有2。他们不动,所以可以“t谈论可移植性。一个小问题是平衡。往往想要小费,所以我支持2后腿一寸或两个,帮我解决了。思想上键盘,这样你的体重和角“re淡化键而不是往后看,这“年代好。重键盘底部层也有帮助。

蒂姆•多佛NH 3月4日,2018年

我在我的第三人,不是因为他们“re不好而是因为我有一个半永久的设置在3个地方和我决定,我真的很喜欢这个站。
最大的职业:没有的我的脚踏板。
工作即使有2大,沉重的键盘
——非常稳定
几个缺点防止5星:
——顶级悬臂基地,站将提示如果你加载
——可能有点挑剔最初设立,标志着我的宽度和高度与职位简化移动
——顶部层底部宽度一样,这是一个问题,如果你有一个宽板在底部&小(想想MiniNova)
- 6块拆除运输时,有点笨拙

但我没发现任何“更好地为我的需求

通过从卡拉马祖t·w·齐默尔曼,2017年10月17日,MI

单位很容易组装,非常坚固。它支持键盘没有问题。我不是在舞台上使用它,所以我不知道这是多么容易运输,但是一个伟大的工作室。

Bob单例1月3日,2017年音乐背景:composer-producer

它说,它将做这一切。我有一个加权行动88键键盘低,和一个synth行动61年关键更新的控制上。两者都是坚如磐石;没有抖动,没有跳舞,只是做的事情和钥匙静坐。太棒了。我想要的一切在我从不转动的固定装置,和任何高度可调。

这将是一个很难的路,除非你有很多房间。将拆卸,但它不是一个“click-click-it完成”操作。好了,我不想让我的行动。

指令是足够的;虽然比宜家的指令集爷们儿一点。我仍然有4个垫圈,去某个地方,我不能找出。他们没有提到的汇编指令,这似乎是没有他们好。

它有钻洞相隔2”调整上下立管。我是个完美主义者(不是强迫症——我的治疗师说所以…)的高度,我的键盘。2“增量过高或者过低。线程结束的旋钮是尖的,不是平的,所以你不需要把它们放进一个洞——你可以安全地把立管就是你想要的高度。我是一个快乐的完美主义者。

镇静剂——直觉,我就会猜测,下节将精益远离我的膝盖就像我看过类似的站我使用在另一个安装。不,它倾向于我的膝盖。我花了一段时间,通过我的大脑。它工作好;我从来没有撞我的膝盖。同时,脚伸出向键盘以外的球员。这对我来说是一个学习的过程,有两种的金属块绊倒当你站附近。我认为这些应该更短。设计者没有。

就是这样。4星。我很高兴。

如果我可以,我想给斯威特沃特五星级的支持。188金宝搏官网是多少真的,五星级。这是可怕的,我不知道如何在业务如此快速和慷慨支持。一个旋钮在我的站被打破了,但不是悲剧。我还可以把它放在工作,尽管这不是一件舒服的事情。我发送的图片破碎的旋钮来支持,他们反应很快,更换以后的路上。有更多的故事,但经历是史诗。

由大卫·摩尔从新罕布什尔州9月13日,2016年

我使用这个系统平台。它非常坚固的即使在最大高度和宽度。我经常使用它站在了一个88年在底部和顶部clonewheel。

如果你不拆卸底部从玩位置设置是一种翻转打开腿,所以需要更多的时间比X站。其稳定的多但最重的X表示,当然,你得到更多的空间来踏板。可以将其分解和重新接上折叠腿更紧凑的单位但是最终演出我永远无法管理,所以我把它分开,查克广告站袋。它不适合在那个袋子还是组装。不过,更容易适应后面的车比X站。

缺点:(1)有两个塑料垫圈”顶部的腿,你可以休息如果你扩展过快,替代目前还不清楚。并不影响稳定虽然只要你紧旋钮,你想做的无论如何(2)对我来说,顶级刚刚足够低。(3)这样就好了如果有更多可用的一个“系统”或第二层是基于相当标准化的酒吧,这样你可以为笔记本电脑,添加各种表等。(4)遗憾的是酒吧顶部站是固定的,而不是可调(前后);和我的板单元的重心比理想更后面。有时我把底板期待访问按钮和我必须小心不要打翻设置向后当我把它推。如果你把一个沉重的董事会上,光一个底部(我只是稍微比我重下)你可能有问题。我希望我能推动上层钢筋前进。

这些缺点对大多数人来说都是相当轻微但阻止我5。

哈利的弗里蒙特,6月23日,2016年音乐背景:敬拜的牧师

这个站是我使用的固体。我主要是使用和阿莱西Q88和类似的大小M-Audio键盘。我爱高度和宽度的灵活性。和它是轻量级的,但强。我没有试过一个更大的,全尺寸键盘,比如我的主题ES8,但通过运动和坚固的拆卸和安装。

通过从在Ed,美国在2015年1月8日音乐背景:吉他、键盘、录音、生活

看着站是固体,坚固可靠的键盘站。很容易组装,并做出相应的调整。这是在不到24小时交付给我。哇!我玩很多演出和需要的东西将是可靠和旅行的滥用。最让我震撼的购买是跟进客户服务。我一定会将返回客户!

由Zohni(又名Misso D 'Egitto) 8月22日,2013年音乐背景:歌手

相当简单。没有所需的工具,只是用手。我个人将安装一个平木板下两个基地(英尺)在12杯垫和螺丝底部每个板(6)。它将很容易移动&。杯垫的大小是未知的。

通过射线从美国1月2日,2013年音乐背景:经典训练,时髦的出生,奔放的生活。一生的音乐家

需要一些时间来适应。我用x表示所有我的生活。
它花一点时间充分理解这些部分,但是当你做什么,你有一个令人印象深刻的硬件,将持续多年。

它有很多优势
——所有的金属部件(必须有)没有plasticky失败。
——容易褶皱,不太重(必须删除二线)
——广泛的适应性
——非常gig-able和耐用
——很多脚的房间如果你是像我一样的一个踏板迷

停止阅读和买一个!

杰克loganbill来自芝加哥,9月17日,2012年音乐背景:极端的爱好者

我总是欣赏台上代表其价值,易于设置,和整体效用,这键盘,两层站没有让人失望。我用它来保存一个雅马哈的键盘(较低的层)和自定义构建影响董事会(混合器和吉他效果)在第二层。它完美。

有这么多站选择通常很难知道从在线目录单位将最适合你的需要。我很高兴说我用这个站作出了正确的选择。

设置说明很清楚,我能将它安装在10 - 15分钟。它是没有任何flex非常坚实的和坚固的。

我唯一的“骗”是,我希望第二层调整另一个两英寸高。然而,这意味着键盘,第二层是完全的使用。

总是,欣赏斯威特沃特服务,价格,免费送货。188金宝搏官网是多少

从西瀑布,布莱恩·哈维或3月23日,2012 音乐背景:职业音乐家,录音工程师

我购买的这个平台演出。我用它与2 60英镑+键盘,我倾向于重玩。站是非常坚固的,很少有运动在玩。我唯一的抱怨是,顶级闲逛只是有点太远在董事会。就好了如果梁可调前回到顶级解决这个问题。总的来说我很满意这个购买。

斯蒂芬·Lynch-Maass从美国2月8日,2012年音乐背景:演员、教育家、音乐产业

1级深度足以容纳我Minimoog旅行者,和第二teir低(尽管“航行者”号)仍然有足够的间隙,我去看,和舒适控制“航行者”号的前面板。站很坚固,很符合我的工作室空间,看起来有吸引力。

2011年8月23日,由马克从洛杉矶

我有一个重达一吨的88键控制器。我需要一个站可以处理重量和将第二个键盘上,我使用的声音。这个站是伟大的!它调整的演出,我可能想站以及完美的高度坐在表演。顶级允许定位第二个键盘几乎任何高度和角度与较低的键盘。我喜欢有顶级键盘几乎躺下键盘之上,这站让我这样做。最好的部分是它如此强烈和稳定。我从来没有觉得这个东西会折叠或倒塌。它很好,值得购买!唯一的缺点,我必须强调这是一个非常小的缺点,是把它分开。 There are two support bars that disconnect and I'm always afraid I'm gonna forget them at a show. However, the sturdiness far outweighs the tear down and set up. This stand is GREAT

史蒂夫·巴克曼在昆西,美国3月20日,2010年音乐背景:职业音乐家

我收到了一个更便宜的选择,类似QuikLok站,我家住在工作室。我惊喜地发现这个一样死板和人体工程学是正确的,但更实际的分解,更加灵活的大小和高度。只是一个警告,唯一的原因我只给了它一个4而不是5 -不要把一个相当沉重的顶级没有键盘键盘底部层上相等或较重的重量,它实际上可以向后倾!通常你不会这样做,但设计似乎取决于有较重的键盘底部给它的稳定性。现在我自己的几个,他们作为固体桌面。两个大拇指!

由萧娜6月5日,2019年音乐背景:低音吉他和键盘/有抱负的生产商

它肯定是沉重的责任。,可能他们宣称的400磅。
然而,它遭受一样的其他多层站受到影响
上层板只能访问站,或有一个高的凳子上。但随后。较低的董事会将会笨拙地低。我想它会在舞台上工作得很好,你在哪里站起来。我使用它在一个工作室在一个坐着的位置,无论我怎么调整顶层上在哪里我不能达到一个令人满意的折衷足够低的屏幕和控制从一个坐着的位置,没有较低的视线挡住了。还坐着时,较低的横梁击中膝盖和阻止我得到非常接近较低。所以我向我滑董事会,让它挂在边缘几英寸,也给出了一个更低的板顶部下拉出板。
我还没有尝试过的一件事是购买一个高大,可调的椅子,让我看清楚前板。
除了这些显而易见的东西,站坚如磐石。完全没有担心的安全。
我想与任何muti-tier站一样,你必须考虑如何轻松访问不同高度的键盘。

Rob a在11月28日,2017年音乐背景:职业音乐家

我用这个键盘站也购买了第三层。它与没有摆动的固体。大量的调整和看起来不错。我只把它折点,否则我个人发现它变得有点任务设置备份。足够的旋钮和调整要求对我这么说。很可能是我,但我不完全把它折下来。还有许多的小塑料盖板可以流行(到目前为止只有一个,但幸运的是我看到了它,把一个小胶水在合适的地方都让他们)。至于第三层,它把键盘有点远比我想的,所以,我把东西装起来来自另一个站,更有效地为我工作。这个站的基础坚固,但它也可以是一个轻微的跳闸风险。它发生了。 Despite all this, it is my main keyboard stand for bigger shows. One last minor thing; I have found that rocking it forward does present a possible tipping hazard. Obviously that depends on placement and weight of your keyboards and with common sense, not likely to happen. It is a very cool stand all said. So here's a recap: it's solid with no wobble. It doesn't quite fold up as easily and compactly as I would like. It can hold 3 keys almost in a manner that I would like. There are no big gaps between the boards... YES!. I would recommend this stand with the points that I have observed from having it.

201188金宝搏官网是多少6年11月28日,由斯威特沃特客户

站很坚固。有点失望,# 1的按钮坏了,当我收到它,但是担心,站可能是最强的我用我的30多年的表演。

201188金宝搏官网是多少5年7月22日,由斯威特沃特来自明尼苏达州的客户音乐背景:半职业

构造和好的价格。需要有更多的帧中冲孔的高度更灵活。

vid从布法罗,纽约美国于2009年12月31日音乐背景:半专业比赛的音乐家

“重型”并不开始描述这个站,这是岩石稳定和崩溃一个良好的大小(我能让它只是适合老GKB-49)。我认为这有两个原因:3.5 Setup和teardown需要更长的时间比与其他站,上层的水平深度并不是可调——上董事会最终挂在董事会,所以很难看到较低的控制。一旦我习惯了这两个特质,站了好!

杰夫年代的MN 4月2日,2023年

它持有一个键盘和其他的工作,外置装备,但看起来并不好做这项工作。

通过从Aitkin斯科特,mn 3月29日,2023年音乐背景:酒吧乐队音乐家

好站但是不得不清理粉末涂料10毫米的线程。粉末涂料也很难组装与主横拉条
需要更多的坐姿调整孔。

2022年12月23日,来自俄亥俄州的丹•沃兹沃思

我买了这个站在我的工作室,但把它3实践. .它已经很多脚结束端点和塑料端帽第二层……的工作室…。不利于旅游…。

通过从明尼阿波利斯威廉·谢尔曼,MN在2022年1月10日音乐背景:业余工作室

我买了这个站的形式因素。我需要一个替代我的工作室,所以我命令相同的立场。幸运的是我不需要这个站的现场演出。而把它在一起,其中一个极小的橡胶脚掉了。我能够螺丝回来,但是当我注意到这些橡胶英尺有多廉价。如果我把这个站的演出我很确定我宽松的其中几个。乐谱架公司称为“台上”我觉得很奇怪,这个产品的一部分,实际上接触阶段是如此脆弱的我不会相信它在生活环境。在设置时,站非常稳定和构建。太坏他们廉价的设计/部分应该非常艰难的和可靠的。如果你计划着这个站在准备好螺丝刀,以防脱落。

由马修·格雷戈里·特拉弗斯城,MI 4月18日,2020年

很结实,但有几个问题。首先,谁设计它不懂重量是如何分配的。脚不够长在后面支持体重非常顶级的后面,他们漫无目的地粘在前面。脚需要回到大约5英寸。这将使站更稳定。第二,定位层底部的孔(因此顶级也)太有限。腿底部层可以休息,等下一个位置是4英寸高。甚至不是一个适合坐下来。这完全是荒谬的,因为所有需要解决几个洞。他们很容易钻洞分开半英寸(或者更少),这将使更多的使用。 Numbered marks on the bars would also be handy so you could easily see which hole you've screwed in for setting the other one.

于2018年11月4日从北拜伦音乐背景:福音、R&B、国家钢琴家/风琴演奏者

这是一个很好的键盘站,但缺点是需要这么长时间。这不是一个站,您可以使用迟到演出或参与。需要你至少10分钟。

201188金宝搏官网是多少7年12月28日,由斯威特沃特客户

一起就好了,但是顶级的两个持有人不符合。它非常烦人,我的键盘上相对较轻的现在不是很稳定。我使用它,但它是一个常数烦恼。

2017年1月25日,由Scriptar从芝加哥音乐背景:键盘手

优点:坚固的建筑,而不是太难组装、调整也不会太难。不太重的。
缺点:没有多少办法调整。不能调整上层组件举行小于底部,因为他们都是固定在相同的宽度。
缺点:这个站可以头重脚轻的如果你不小心你加载。总是总是总是先把较低的键盘,拿下来。保持你的打火机键盘上。不要太摇滚了显示或你可能提示了整个钻井平台缓冲着陆。啊。

如果底部的一部分Z只有延长一点,这将得到另一个明星。仍然有一点的角度调整。

来自蒙大拿SG 1月2日2017年音乐背景:30 yr.音乐和录音pro。

站是坚固的,非常可调,可以容纳更多的重量比我将穿上它。我给站4 +
明星在台上除了一些质量控制问题。188金宝搏官网是多少斯威特沃特送我的第二站,因为在第一个一些制造缺陷。第二个也有制造(不同的)缺陷。我
算一个变通方法,所以我很好,但是需要提高赌注走上舞台,舞台的产品我有几个老建筑比新东西。一如既往地斯威特沃特188金宝搏官网是多少很好与客户服务。!

通过从克利夫兰拉斯•理查兹,2013年5月31日哦音乐背景:职业音乐家,音乐老师

非常,非常坚实的站。适应一种痛苦。我总是携带至少两个键。大部分的双站只会对他们一直开放。我经常玩,所以它很重要。说我现在55岁,我还经常玩,这个东西是伟大的,我只需要花时间去学习如何演出后迅速分解。老狗和新技巧。

由美国克里斯法国4月29日,2013年音乐背景:职业音乐家

这是一块坚实的齿轮,将支持两个键盘很好。有点涉及建立第一次因为你需要熟悉的部分,按照一定的顺序把事物放在一起,确保你有可转动设置为相同的角度。一旦建立,但是,它很容易使用,它应该做什么。我认为想要廉价的短吻鳄袋携带所有的碎片记过处分,因为它打破了成6单独的块。
如果我有任何顾虑这个项目,我认为缺乏适应性上面层是它唯一的缺点。有能力将顶级向前或向后移动,哪怕是轻微的,我可以有更多的控制的可见性,和访问控制下键盘。自滑动层顶部离玩的位置也会使单位头重脚轻的腿和不稳定,这可能是为什么这不是一个调整选项

由迈克尔•汤普森LaManna从俄亥俄州1月3日,2013年音乐背景:我打键,吉他,小号。

制作精良,重型。整体适应性好;我无法得到我需要站在确切的高度和我也能得到我想要的二线角的方法但没有哭了。很容易打碎你的脚的底部Z-leg;我从来没有做过任何我的x表示但这只是我。这是一个不错的立场。值得的钱。

来自明尼苏达州的菲尔·琼斯在5月8日,2018年音乐背景:一生的爱好

在这里我的观点。这个站可以有更多的可折叠,更容易运输。最大的问题是中心的平衡。它容易向前。没有调整平衡的中心。

由彼得·格林湾,于2014年3月11日,美国WI 音乐背景:一个人带的球员

现在可能是好的。然而,如果可能的话,我更愿意增加更多的支持在上面搁置同时添加两个支撑杆从地板上杆到第一个搁置给予更有力的支持。并重新紧固旋钮洞排队更好……我说的原因是,因为我有2个键盘在证人席上每个周末,几乎是1万年我在站. .

2020年1月25日,托马斯•史密斯从弗吉尼亚

没有波动,然而……这是一个大不过…这需要一个沉重的底部层键盘站在每当顶级加载。否则重心过度转向后方,只需略微向后推动一切结束。幸运的是我发现了这个在我的工作室当站不远一堵墙。否则我MODX6上层会最终在地板上。我看到其他评论也提到这个问题,我希望我读过的不仅仅是最初几个高度积极的评论。如果高层没有附加问题可能消失……不确定……我have not tried. But one thing is for sure: With this stand, always load the bottom tier first and unload it last. I'm looking for ways to extend the floor supports out further in the rear to make this stand more stable (which bothers me a bit.. I should not have to do this... and it makes be wonder if On-Stage really tests these stands in the real world). I purchased an On-Stage mixer stand from Sweetwater a few weeks prior to this purchase and it came with bent pieces that I had to straighten. I am done with On-Stage... another thing that is for sure.

由詹姆斯·g·丰塔纳的Ca 1月21日2018年音乐背景:8岁以来的经验教训。音乐专业。专业。钢琴老师。还玩。当我得到爱它。

大代表沉重的键盘。相当好。适合我的需求但真的缺乏顶级的调整能力。大会对我来说是一个总阻力。它分解为小块,如果你有时间和倾向。我一直都在尝试将它分解成更大的块,装配成旧的键盘包。这个站是专为较重的键盘。他们应该状态! !
稍微把顶级的前面空站和它的倒退。我的键盘是26磅和顶部底部可能是12磅。从我的长椅上站起来,向后走过去的一切。和把我的混合器。所有品牌新!不知道如果我将继续。没有想要另一个X站。有权重的前面站的腿。短的腿太短了。应该更长。 Wish there was a feasible way to extend them. Shouldn"t have to... Tons of stellar reviews but at the very end this issue appeared. Definitely will check the bad ones as deligently as the good next time. Positive—I got it from Sweetwater.

CC的亚特兰大,乔治亚州美国于2013年4月25日音乐背景:35年专业生产商,音乐家,工程师

+:站的功能。容易组装。
-:站倾斜,不站直。看起来尴尬当装有钥匙。没有强大的看起来像一些其他重型站。

于2018年5月7日,由国际扶轮桑迪音乐背景:60多年的键和玩吉他

这个站是好的如果您不想使用它在一个演出,把在你的工作室练习。它说它是一个折叠站,但只有站的一部分,折叠腿底部。其余的站需要组装和拆卸容易运输。

此外,它不是一个非常坚固的立场。你最好有一个沉重的键盘下架,否则很有可能站将向后翻倒。

这都怪我自己购买,因为我没有在购买前阅读评论。我就足够了因为我有一个工作室,可以使用一个双重层永久键盘站。

从夏洛特,基思·a . 2014年7月21日,数控音乐背景:职业音乐家

我买了这代表我的工作室。我有个北方阶段底部和顶部哈蒙德XK3-C。我去加载我的北方,向后站落在我的XK之上!两个音频杰克和杰克有力量折断,需要修理。因为这站没有太多的支持在顶层,它依赖于键盘底部权衡下来。我努力学习,我知道一些其他键盘手。

202188金宝搏官网是多少2年,斯威特沃特客户6月14日

这种“z站在二线的设计,没有任何意义。
第二层应该去另一边的更多的支持的基础。
因为体重,很不平衡,所以很容易倒塌。
一个贫穷的设计选择。

由美国2 equals3 9月12日,2020年

如:这一场一直在等待发生的事故。如果你把键盘——任何体重的顶层,变得头重脚轻的,花不了多少精力别做了。幸运的是,我近一堵墙和一个轻量级的朱诺106顶级,结果只是一个小凹痕石膏灰胶纸夹板。如果你不能看到,通过看图片,嗯. .然而,作为一个站,它是坚固的,容易组装。

201188金宝搏官网是多少7年1月22日,由斯威特沃特客户

这些站提示真正的容易。

台上KS7365-EJ Folding-Z键盘站在第2层评论

低至10美元/月,24密苏里融资*

顾客评论

4.3的5

客户增加了媒体

分享你的想法

关于ZStd2Tier的问题吗?

最高额定评论

大键盘站

最好的键盘站

非常牢固的紧凑和灵活的设置

坚如磐石的沉重的球员。有罪的指控。

两层键盘站

认真站好

做工精良的

重型建筑,我用过的最好的Synth站!

固体!

最好站!

如果你需要你的键盘不动,这是它

Z两层键盘站

2层置于舞台Z键盘站

没有摆动=快乐

Z键盘站

非常坚固的键盘站!可调,易于装配

在舞台上KS7375-KJ与第2层

KS7365-EJ折叠站

坚固的,定做的!

伟大的重型站

适合北方阶段2

键盘决斗站

适合我的需求

坚如磐石!

优秀的代表我的目的

在舞台上键盘站

我正在寻找....

我的新阶段。

台上站。KS7265-EJ HEAVEY-DUTY

重型!

非常坚固和便携式键盘站

除了

最好的站在那里

就买它

沉重的责任Folding-ZStand与第2层。

伟大的产品

台上站KS7365-EJ Pro重型Folding-Z站在第2层

在舞台上站

崎岖的和容易设置

天使的心

惊人的投资KS7365-EJ Pro重型Folding-Z站在第2层

非常简单! ! !

KS7365-EJ pro重型折叠Z站在第2层

公司稳定!

像一辆坦克

真的太棒了!

最好双层键盘站

Sa-weet !

是的,这是岩石坚如磐石的适应性……

我使用

超级强!

站ks7365-EJ

键盘站

太棒了。非常坚固。

强大的

好于预期

伟大的站!

我有三个!

大键盘站

只是我在寻找什么!

核心!

Z站

最后一站你会需要的!

A1艾布拉姆斯站!

最好的我用过

只是我用过最好的站!

这是一辆坦克

伟大的

伟大的站

坚如磐石,安全的昂贵的作品

伟大的站

伟大的站!