评论
SKB 1 skb-ps-8 8-Port Pedalboard Gig袋评论
动力Pedalboard与权力和空间与Gigbag到8一般规模的踏板
寻找一个简单的和可负担得起的pedalboard,可以自备八踏板?这是SKB-PS-8 !建超耐磨,轻便,容易将前往你的演出。另外,它带有一个重型弹道尼龙携带袋外部拉链口袋和可调节的肩带,进一步简化了演出之旅。和足够的内置电源端口和表面积八踏板,你会得到你需要的一切。当你需要演出与你最喜欢的踏板,把它们放在SKB-PS-8和肯定他们到达演出——回家——在一块!
choose a payment option below!
" three-pay-present="1" three-pay-name="3 Easy Payments" three-pay-num-months="3" three-pay-num-months-word="three" three-pay-num-recurring-months="2" three-pay-processing-fee="$10" three-pay-show-monthly="1" three-pay-min-total="" three-pay-first-payment-dollars="60" three-pay-first-payment-cents=".01" three-pay-recurring-payment-dollars="49" three-pay-recurring-payment-cents=".99">
在股票!
只剩下8在股票!更多的方式。
顾客评论
客户增加了媒体
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 11351, "store_items_review_id": 306688, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-1fa22979e5c14554ac1894bedf38b78853edf9de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-b6c39bc343ba6de893a6666acfdc2df6a529bc91\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "sir_title": "A great value", "sir_comments": "I picked one of these up for convenience of use in my studio, though I plan to travel locally with it. There are more pressing reviews Id like to get out of the way, but I think some important information about this product needs disclosing.
\n
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 21633, "store_items_review_id": 354107, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-db34ddbf7d0fc4be08ee8001fc4037e9b42af8de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ce96678b309b8c72249555a2f75a9d1cae326d0c\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "sir_title": "Good board but a little messy", "sir_comments": "The board is great in providing a large area for flexibility in pedal placement and easy for plugging in up to 8 pedals. However, since you cant run any cables and wires underneath like most other designs, it does get a little messy and requires wire ties to keep the look clean. See photo. Otherwise it is a great budget or starter pedal board.", "sir_rating": "4.0", "sir_name": "Imran Khan", "sir_whereareyou": "Denver, CO", "sir_background": "", "sir_keepanonymous": "0" } ]" review-count="5">
188金宝搏官网是多少斯威特沃特评论
卡森麦克莱恩
188金宝搏官网是多少
销售工程师
的SKB-PS-8 pedalboard是市场上最具成本效益的动力pedalboard。适合6跺,哇! ! !完美! ! !
分享你的想法
帮助其他音乐爱好者齿轮通过分享你的意见你购买的装备。
关于SKBPS8的问题吗?
或者打电话给我们(800)222 - 4700
SKB的问题1 skb-ps-8 8-Port Pedalboard Gig袋吗?
188金宝搏官网是多少斯威特沃特的销售工程师被视为最有经验的音乐产业和知识渊博的专业人士,与广泛的音乐背景和强化训练在最新的产品和技术。他们可以为您提供个性化的产品建议任何时候你需要它。
输入你的问题下面或打电话给我们(800)222 - 4700
最高额定评论
页面1的1
优秀的Pedalboard系统
SKB的pedalboard是个不错的,干净的方式组织和推动你的踏板。
踏板板
我爱这个东西!足够的空间对于一些“希望很快“额外的踏板和不贵9 v电池处理!
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 11351, "store_items_review_id": 306688, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-1fa22979e5c14554ac1894bedf38b78853edf9de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-b6c39bc343ba6de893a6666acfdc2df6a529bc91\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "sir_title": "A great value", "sir_comments": "I picked one of these up for convenience of use in my studio, though I plan to travel locally with it. There are more pressing reviews Id like to get out of the way, but I think some important information about this product needs disclosing.
\n
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 21633, "store_items_review_id": 354107, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-db34ddbf7d0fc4be08ee8001fc4037e9b42af8de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ce96678b309b8c72249555a2f75a9d1cae326d0c\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "sir_title": "Good board but a little messy", "sir_comments": "The board is great in providing a large area for flexibility in pedal placement and easy for plugging in up to 8 pedals. However, since you cant run any cables and wires underneath like most other designs, it does get a little messy and requires wire ties to keep the look clean. See photo. Otherwise it is a great budget or starter pedal board.", "sir_rating": "4.0", "sir_name": "Imran Khan", "sir_whereareyou": "Denver, CO", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="350167">
大板!
动力,适合8踏板你还能要求什么!这个板是固体,强不会弯曲或弯曲。买这个董事会如果您看看!
刚刚好!
直到现在我已经拥有一个紧凑的从海外pedalboards .......和不满意是因为董事会规模拥挤我5影响到空间太小,不足以有效地使用踏板。
这对我.....新董事会是完美的足够的空间来适应我的5个踏板,,因为更好的大小,我添加了一个6日需要效果!
谢谢,斯威特沃188金宝搏官网是多少特,营销和销售一个踏板,是完美的声学选手!
完美的小踏板板
很好和易于使用。设置8踏板,但这将是真正的紧张。我快6和它的完美。伟大的选择在一个伟大的价格。谢谢你再一次的销售工程师斯威特沃特让它适合我。188金宝搏官网是多少
伟大的工作
这个踏板板工作不错,我有7个踏板,看起来很完美工业大国,我唯一的不满是包你携带,处理有点便宜但是我把带子放在现在,它适合于我,这是我第一次踏板董事会然而我安装踏板板为别人,这是一个很好的便宜的设置
伟大的踏板板! ! !
我正在创建第一个踏板板将简单的组装和发现这个完美的董事会为简单起见,价格和便利。我爱的尼龙搭扣,因为它很容易定制和它有我需要的每一个电力电缆。(即使是电源适配器有维可牢! !)。这样很酷也很容易携带。这个董事会真的拯救我的时候设置我的平台,让一切整洁有条理。
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 11351, "store_items_review_id": 306688, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-1fa22979e5c14554ac1894bedf38b78853edf9de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-b6c39bc343ba6de893a6666acfdc2df6a529bc91\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "sir_title": "A great value", "sir_comments": "I picked one of these up for convenience of use in my studio, though I plan to travel locally with it. There are more pressing reviews Id like to get out of the way, but I think some important information about this product needs disclosing.
\n
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 21633, "store_items_review_id": 354107, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-db34ddbf7d0fc4be08ee8001fc4037e9b42af8de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ce96678b309b8c72249555a2f75a9d1cae326d0c\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "sir_title": "Good board but a little messy", "sir_comments": "The board is great in providing a large area for flexibility in pedal placement and easy for plugging in up to 8 pedals. However, since you cant run any cables and wires underneath like most other designs, it does get a little messy and requires wire ties to keep the look clean. See photo. Otherwise it is a great budget or starter pedal board.", "sir_rating": "4.0", "sir_name": "Imran Khan", "sir_whereareyou": "Denver, CO", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="310790">
一个伟大的价值
我选择其中的一个在我的工作室为了方便使用,但是我计划在当地旅游。有更迫切的评论我想出去,但是我认为一些重要的信息关于这个产品需要披露。
通过评论,我看到了批评,跌至三个方面:
1)。电源块提供的疲弱。
2)。任何组织的权力,导致普通老鼠的巢穴。
3)。廉价的携带包。
鉴于该PB提供的便利,我想解决上述个人分我的经验。我收到了pedalboard 2021年2月的第二周。
1)。我见过的一些评论状态,电源块提供证明贫血踏板的应用程序。我单位到达1.0安培砖,同意我看过其他评论。我因为描述规格500毫安来源,这将是贫血。无论如何,1.0安培意味着(8)大约100毫安典型踏板空间将约20%,最糟糕的情况。当然,还有更高的电流9 v电力解决方案现成应该出现的需要。我已经测试了这个电源在工作室,并发现它是安静。我的踏板动力预算(见图)资金低于600 mA。几个我的踏板使用缺乏大量的权力。注意记录,我可能会给海象颤音踏板一个孤立的电源端口——他们可以在中间往往会产生一些噪声和更高的频率。
2)。这是一个有效的点,但可以很容易地解决。我用自粘的可调夹来解决多余的电源线的长度pedalboard的前缘。一袋50成本低于10美元从DIY供应商/制造商的商品。
3)。我想知道SKB的备忘录,处理。我想说pedalboard,完全充实,仍然大大超出了我的Les Paul。测试包,我去我的商店和压缩套筒扳手集和重型电池钻几个Les Paul,压缩起来,散步在我很多,没有问题。
我不是说这PB与Pedaltrain(这也是我自己的),或者一个手工制作的海象凤凰孤立供应(我自己),但对于价格,它真的是一个很棒的产品,节省空间和杂乱。它甚至看起来不错,有钩和环预装。加入正在出售电缆夹和你有一个小型系统解决方案,很难击败。
的功能在这个价格点,我得给这个产品5星。
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 11351, "store_items_review_id": 306688, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-1fa22979e5c14554ac1894bedf38b78853edf9de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-b6c39bc343ba6de893a6666acfdc2df6a529bc91\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "sir_title": "A great value", "sir_comments": "I picked one of these up for convenience of use in my studio, though I plan to travel locally with it. There are more pressing reviews Id like to get out of the way, but I think some important information about this product needs disclosing.
\n
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 21633, "store_items_review_id": 354107, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-db34ddbf7d0fc4be08ee8001fc4037e9b42af8de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ce96678b309b8c72249555a2f75a9d1cae326d0c\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "sir_title": "Good board but a little messy", "sir_comments": "The board is great in providing a large area for flexibility in pedal placement and easy for plugging in up to 8 pedals. However, since you cant run any cables and wires underneath like most other designs, it does get a little messy and requires wire ties to keep the look clean. See photo. Otherwise it is a great budget or starter pedal board.", "sir_rating": "4.0", "sir_name": "Imran Khan", "sir_whereareyou": "Denver, CO", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="306688">
快乐的到目前为止
到目前为止,我很喜欢这种踏板的董事会。这是我拥有的第一个,所以我没有经验比较。但是开箱即用的,组装和插入,它是伟大的。固体,有足够的房间来满足我的踏板,和房间添加,我所需要的。电力供应似乎安静。我读过一些用户报告的问题和拉链,所以我很高兴地发现这些都是足够的,比我害怕更坚实。我们在COVID限制,所以我没有机会收拾,把这个排练和演出,但我感觉质量足以满足我的需求作为一个兼职演奏音乐的音乐家。在很大程度上,我喜欢简单的设置和固体pedalboard本身的感觉。其他人则指出,电源连接器的比他们需要更长时间,这比太短。多余的可以很容易地与弯弯曲曲的,捆绑在一起,并与维可牢了。
伟大的董事会
这似乎是很好,它的目的。我第一次董事会,到目前为止一切顺利
SKB-PS-8 Pedalboard
一个伟大的价值!制作精良,功能!
SKB-PS-8 Pedalboard
爱pedalboard,伟大的产品。唯一的,我爱它,但可以用一个更结实的处理。这帮助组织所有我的踏板,非常满意这个产品和服务在斯威特沃特!188金宝搏官网是多少
简单和精确混合成一个伟大的产品
所以我承认当我打开盒子把这个踏板板我有点怀疑。然而,斯威特沃特和188金宝搏官网是多少迈克·哈蒙德已被证明对我一次又一次的任何产品从斯威特沃特是金!对我来说很容易配置我的齿轮上,在没有时间,我是“骑,闪电的段子”!我要再说一遍,迈克哈蒙德是一个伟大的销售工程师!斯威特沃188金宝搏官网是多少特继续证明我为什么他们在他们所做的是最好的。如果你想建立一个音乐库,这些人完成工作的专业人员。
伟大的交易和产品
这是我第三次尝试踏板董事会和我很高兴说我满意这一个。它是如此坚固的和光线。我也喜欢前面的低到地面。我不能说足够的关于电源部分除了说这是聪明的。每线很容易插入和简单约束的方式。动力装置的建造是所以隐藏我找不到它。良好的价格和一个伟大的董事会。这样对这个也很好,如果你想把所有的灰尘为这个价格你可以预期。
比我想象的更大
这是一个大惊喜当它到达我想8兜售董事会没有大但是它是巨大的,说实话,我认为你可能可以达到10兜售这事唯一的收回是我拥有很多失真,超速和压缩兜售,大多数人都知道相当于一些主要反馈和嗡嗡声问题,当我把所有这些兜售随机的嗡嗡声或嗡嗡声从我的电源,所以如果你喜欢金属,硬核,或重型摇滚得到一个或两个过滤器和某种力量空调你会很高兴你这么做是值得的钱但不要忘记给你买电缆兜售它不跟他们走
SKB PS 8踏板董事会工作包
这是尽善尽美。所需的一切需要有组织的董事会。
权力
电缆
尼龙搭扣带
8端口顶部
重型板与轻微的角度,
路凝灰岩准备好了。
伟大的产品
好质量的踏板。从淡水只有最好的产品和价格。188金宝搏官网是多少最好的客户服务行业。谢谢
SKB踏板板
你不能打败它的价格。一个很好的踏板。你不会失望(2)。一切积极..............
伟大的董事会为了钱!
伟大的踏板板在一个伟大的价格从斯威特沃特。188金宝搏官网是多少这不是五星级的唯一原因是包可能是更厚的....不过就是这样。否则它就安静,没有噪音。踏板坐也刚刚好。不是太大,太小了。再次感谢迦勒很大!
艺术
伟大的pedalboard。爱的力量特性,它仍然是我的踏板和足够大的容易包装和运输。
方便的!
易于使用,坚固,自我驱动板。坐在一个好角度,钩和环表面拥有很好,即使有沉重的踏板。啊我的一个踏板是一个大孩子Ibanez说哭泣的恶魔哇,在运输和它保存好。我得不到任何的负面力量从板连接的方式,就像它应该。事实上我有两个。其4.5而不是5的唯一原因是“工作包”很便宜,拉链在主室和电缆室面临两端的袋子,这是奇怪的,手柄很弱。支付额外购买的版本硬垫演出情况相反的袋子。
巨大的价值
如果你是刚刚开始进入使用踏板,这是一个伟大的董事会开始构建您的收藏!它是坚固、可靠和内置的电源使事情很方便。和它有一个演出袋,电源电缆,尼龙搭扣,这样你就可以确保你的踏板呆在的地方。我很满意我的购买。
SKB Pedalboard
终于得到了心血来潮pedalboard和很高兴我做了。188金宝搏官网是多少斯威特沃特最好的人来帮助你。我的销售工程师迈克尔水鸟和技术团队就应该被高5 ! !无论如何一个可能认为团队@斯威特沃特是一个最好的商务. .188金宝搏官网是多少这pedalboard持有踏板你需要你的需求,很容易设置。它有维可牢持有你的踏板整齐到位和插头的安装非常适合您的需求。演出袋与它可能是一个更坚固的但价格你不能出错,小心一点额外的它应该非常适合你的需要。我只是想花时间去感谢每个人@斯威特沃特他们做的工作,当你决定选择去与团队@斯威特沃特是一个无需用脑188金宝搏官网是多少的事....
这个踏板板是一个不错的选择,在未来可能会得到另一个第二个设置。
的把戏!
我真的很喜欢这个。我不得不买第二个,因为一个电涌在我家里拿出我的第一个,踏板,一个音箱,但足够我的困境....这样做它应该做什么好,我需要处理尽可能多的踏板,再加上重量低于一些我见过很多。
我只脱下一半明星因为这gigbag不持有与踏板安装,如果你把它的主意,对吗?
我买了1 skb-ps-8pro是刚性的,光的情况下,伟大的工作。我喜欢它这么多我买了一个小机我也自己。
优秀的Pedalboard。
这是一个很好的产品。易于使用和包。这是所有我需要的电源板。有足够的空间来设置你的踏板,看看哪个是哪个。它使一个巨大的差异记过处分!
完美的尺寸
董事会制定完全适合我。即使有各种各样的踏板品牌,它符合八个踏板,不占用太多的空间在舞台上。正是我一直在寻找在一个好价钱。SKB我有一个大的踏板董事会的15岁,几乎没有显示任何磨损,所以我相信这个委员会将会持久。
SKB-PS-8
这是一个hevy责任由董事会。我会给它5,如果它有一个转换开关在董事会本身我老和懒惰和插头拔掉它。这是唯一的原因没有得到一个直接的5
如果你不有一个踏板板这是一个真正的好的开始。
Frank D
很好的价值
为我的儿子买了这个,厌倦了一直在寻找踏板,权力词霸和绳索。质量比价格更反映了。现在,当它的时间去,拉上拉链袋。袋子里的比笔记本电脑包,但有足够的房间哇,proco老鼠,管前置放大器和四个老板踏板。
真正的好
它应该做什么,它。
没有太花哨?完美的。
我弹吉他已经3年,和我玩一直围绕着影响。我最喜欢的乐队pedalboard为他们特别。当时间到了,我得到一个,我不没有去寻找什么。我发现SKB PS-8 Pedalboard。它可以容纳超过足够的踏板(8)和非常负担得起的。当我终于在圣诞节,这是我所希望的一切。没有什么幻想。董事会的踏板,一个充电器和一个案子。这就是我是诚实地要求。对我来说,100美元是一个讨价还价的地狱宽敞,坚固的pedalboard。 I love it.
好板但有点乱
董事会是伟大的在提供灵活性的大面积踏板位置和容易插入到8踏板。然而,由于你不能运行任何电缆和电线下面像大多数其他设计一样,它有点杂乱,且需要线关系保持外观干净。见图。否则它是一个很好的预算或起动器踏板。
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 11351, "store_items_review_id": 306688, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-1fa22979e5c14554ac1894bedf38b78853edf9de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-b6c39bc343ba6de893a6666acfdc2df6a529bc91\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjEwMzIzMTUwMjExLXBocHIzMzNhZS5qcGVn", "sir_title": "A great value", "sir_comments": "I picked one of these up for convenience of use in my studio, though I plan to travel locally with it. There are more pressing reviews Id like to get out of the way, but I think some important information about this product needs disclosing.
\n
\nLooking through the reviews, I saw criticisms that fell to three areas:
\n1.)\tWeakness in the power brick supplied.
\n2.)\tNo organization for power leads, resulting in the usual rats nest on top.
\n3.)\tThe cheapness of the carrying bag.
\n
\nGiven the convenience provided by this PB, I thought Id address the above individual points from my experience. I received my pedalboard the second week of February 2021.
\n
\n1.)\tSome of the reviews Ive seen state that the power brick supplied proved anemic for some pedal applications. My unit arrived with a 1.0 Amp brick, which agrees with other reviews Ive read. I state this because the description specs a 500 mA source, which would be anemic. Anyway, 1.0 Amp means roughly that (8) 100 mA typical pedals would leave about 20% headroom, worst case. Of course, there are higher current 9V power solutions readily available should the need arise. Ive tested this power supply in the studio and found it to be quiet. My pedal power budget (see photo) sums to a bit under 600 mA. A couple of my pedals use scant amounts of power. I note that for recording, I might give my Walrus tremolo pedal an isolated power port--they can tend to generate a bit of noise at intermediate and higher frequencies.
\n
\n2.)\tThis is a valid point, but one that can be easily addressed. I used self-adhesive adjustable clips to fix the excess power leads length to the leading edge of the pedalboard. A bag of fifty costs less than $10 from suppliers of DIY\/Maker goods.
\n
\n3.)\tIm wondering if SKB got the memo on their bag and dealt with it. Id say my pedalboard, fully fleshed out, is still substantially outweighed by my Les Paul. To test the bag, I went out to my shop and zipped up my socket wrench set and heavy-duty battery-powered drill--several Les Pauls, zipped it up, and took a walk around my lot. No problems.
\nNow Im not saying this PB compares with a Pedaltrain (which I also own), or a handmade Walrus Phoenix isolated supply (I also own), but for the price, its a really terrific product that saves space and clutter. It even looks nice and comes with the hook and loop pre-installed. Add the adhesive-backed cable clips and you have a solution for smaller systems that pretty hard to beat.
\n
\nFor the functionality at this price point, Ive got to give this product 5 stars.", "sir_rating": "5.0", "sir_name": "ToneCave Studios and Systems", "sir_whereareyou": "Raleigh, NC", "sir_background": "", "sir_keepanonymous": "0" }, { "id": 21633, "store_items_review_id": 354107, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-db34ddbf7d0fc4be08ee8001fc4037e9b42af8de\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-ce96678b309b8c72249555a2f75a9d1cae326d0c\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwNDA3MjMxMjU0LXBocHVibnZmOS5qcGVn", "sir_title": "Good board but a little messy", "sir_comments": "The board is great in providing a large area for flexibility in pedal placement and easy for plugging in up to 8 pedals. However, since you cant run any cables and wires underneath like most other designs, it does get a little messy and requires wire ties to keep the look clean. See photo. Otherwise it is a great budget or starter pedal board.", "sir_rating": "4.0", "sir_name": "Imran Khan", "sir_whereareyou": "Denver, CO", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="354107">
积极的事情
这个东西不是坏的。布局是伟大的。它有大量的连接电缆方面如果事情的力量。他们似乎很坚固的。有点吵,但远远没有像我想象的那么糟。我刚刚得到一个孤立的电源情况下,但如果我没有噪音是可以接受的。袋子不是最崎岖的。董事会本身就是从SKB比我想象的少一点的,但是我不会。我需要一些东西来塞和去酒吧演出,这绝对负责。
美国制造
非常大的董事会……完美的组织我彩排的踏板设置/工作室面积。我使用可重用维可牢组织电缆的关系,很容易保持一个整洁pedalboard。我将购买另一个低音操纵踏板设置,不能打败价格。
大板!可怜的包!
SKB让一些伟大的踏板板!这个也不例外。我爱董事会的易用性。我有10年以上的旧版本!这个需要做什么。原因我没有给这个五星级的“演出”包,它基本上是一文不值!SKB应该为自己感到羞愧!除了薄尼龙袋子没有填充!我希望我有见过评论关于这个手,我就会花额外的钱,得到的情况!爱,恨! Now I have to spend more money anyway to get a better protective case for my board and expensive pedals.
爱它!
力量为你所有的踏板和足够的空间8。喜欢它。
钱的好板
好钱的价值。内置的电源,包括电力电缆是一个巨大的优先。演出的包是好的,但塑料连接器可以是金属长期使他们更耐用。
小问题:基础是塑料…没什么大不了,但感觉塑料…如果你知道我的意思。电源板感觉有点松,但是我使用它在几个现场表演没有问题。
我仍然推荐它。最好的价值在这个价格区间的特性。
伟大的
我不经常使用踏板,但这让他们组织良好。
SKB -PS-8
很有价值的钱。容易设置和做它应该做什么。我不介意一个开/关电源开关,
可能最适合家庭工作室或光旅行,肩带的包似乎有点光。我建议这个板高度。
SKB-PS-8
需要给我所有的踏板所以我点2。1董事会持有所有前端通过循环踏板踏板第二我所有的。董事会是很僵硬,不放弃当你跺脚。包括袋是伟大的。我可以离开所有的插入,只是翻覆盖所有的踏板,要让他们保持清洁和尘埃。有维可牢底部的踏板,电源、电缆和电力的奴隶。这没有得到5星的唯一原因是包括电源如果休。我交换他们出来几个Godlykes我躺着。将bacakups包括供应。
得到它
我一直的念头踏板板有一段时间了,但事实上,我只使用几踏板,踏板委员会和成本使我前进但一个伟大的销售价格激励着我一定要得到它。平在地上,安静的电源,和一个好的简单的设计。
廉价和有效的!
PS-8是设置简单板比我实际需要提供更多的空间。唯一的缺点是,电缆不躲在董事会本身,但是您可以轻松地将它们与关系,使其整洁。我不需要任何花哨的,这符合该法案。
当我回到这个家,我发现袋子里的皮带夹坏了。SKB我叫他们给我更换一个星期内,我甚至没有打扰我的斯威特沃特代表!188金宝搏官网是多少很棒的服务从两端!
伟大的pedalboard
这一个伟大的动力pedalboard。我只是用它来在家里的东西,但它似乎相当耐用。我使用一个pedaltrain显示。
不花哨但这份工作。
是这样的:我需要一个踏板,这个发售,问题解决了。我真的没有很多踏板(主要是一个键盘手)所以这个伟大的工作。如果你玩很多或者参观,你可能需要更好的东西。但对我来说,它将正常工作。
伟大的董事会,史上最糟糕的袋子
到目前为止,我真的很喜欢这个,但我不能给它5星星因为我当我打开它的第一印象是,我不应该相信演出袋上的轻薄的处理。我附上我的踏板,放包里离开,我把带子挂在我的肩膀支撑句柄。当我第一次把重量放在肩带,它立即打破。因为我还拿着手柄,它没有下降到地板上。如果你打算买这个,那么价格的因素短吻鳄袋或道路情况,因为你会需要它。如果我做了我就买了一板有更好的演出包括袋。我不高兴不得不买别的东西携带这pedalboard,但对于价格我可能应该期望它。
巨大的价值
唯一的缺点是pedalboard电源输入有点宽松的似乎。有时候,如果你踢或移动你的董事会,它可能断开你的踏板。你必须利用电缆供电到踏板董事会对踏板恢复供电。一个快速修复是运行磁带在电源输入和你很好去
豪伊评论SKB-PS-8踏板董事会
我需要一个踏板板很长一段时间,但是预算限制和需要其他齿轮使我从买一个,直到现在。斯威特188金宝搏官网是多少沃特的Gearfest 2011他们惊人的堆栈的交易作为一个“谢谢”的到来。我发现了踏板板价格我不能错过。
董事会是由重“太空时代”塑料,他们说穿着像铁一样。它将不得不因为我大部分时间在路上。我为我的踏板与各种电线,维可牢垫和带保持踏板,一排插头ins和一堵墙疣。讨厌有什么插头在每一个踏板,或者更糟:电池!这个委员会负责,帮助我安排ped,重型尼龙搭扣,这些作业甚至会让我哭的孩子——和所有在一个惊人的价格。在正常价格我一定会买一个,但我庆幸我去Gearfest 2011。哦,工作包。很高兴你包括。每件东西都保持整洁,所以我只是打开演出。它甚至有一个良好的大小的口袋和弦,等你们不错。 I'll upgrade, one day, to a road case variety, but for now - I'm VERY satisfied. Thanks for the great workmanship SKB, and thanks for the "thank you" pricing to my friends at Sweetwater!!!
skb可以做得更好
我已经拥有了ps-8多年来,转移到一个唐纳。我不喜欢关于这个板电源不够斯通使用大多数现代数字踏板(1就不能权力8踏板)我燃烧最初的ps,取而代之的是2。我不喜欢的第二件事是电缆仍然运行在董事会,董事会唐纳下面就放你走了,设置的一切. .看起来很干净,第三shortcomiing(至少对我来说)是它躺平。唐纳委员会脚可以打开给你一个斜板,使它更容易得到上层踏板。当我使用它看起来好但是唐纳董事会有一个更实际的设计
SKB SKB-PS-8
好适合我所需要的东西。电源有一个小的嗡嗡声(我用耳机很多)所以我交换与老板psa - 120年代,现在是好的。
SKB PS-8Pedalboard
首先,请允许我说我不演出了。我积累不少踏板,需要一种方法来让他们有些组织。我有一个调谐器,延迟,管尖声叫喊的人,哇,混响,合唱,压缩机,颤音踏板都安装在这个委员会。董事会是很好,但是演出袋是一块垃圾!我希望它是修补电缆连接到电缆除了包括电缆!没有办法整齐补丁电缆路由到它所以你onstantly乱七八糟的董事会。董事会本身是制作精良,坚固的,包括尼龙搭扣很多挂载您的踏板。除了小气鬼演出袋你补丁电缆无法整齐的路线,这是一个伟大的设置。
伟大的购买SKB-PS-8 pedalboard。
我拿起这斯威特沃特劳动节期间SKB板出售。188金宝搏官网是多少pedalboard伟大的工作和给我正是我在寻找的。经过多年的地板处理器,我快乐地回到踩箱子。SKB适合我使用我需要所有9 v连接。下来,演出袋是一个防尘罩与皮带和拉链。不要指望它保护pedalboard从其他。
复杂的感情
我买了这个主要是因为它有板载的力量,我想要简单的,我可以马上启动并运行。从这个意义上说,它太棒了。但是我有一个问题/问题。
1。我希望它有一个主要的电源开关。我宁愿把它插入和动力,而不是必须拔掉它关掉一切。
2。电源线的插头松的我的感觉。现在没问题,但是我担心我的问题。
3所示。伟大的维可牢不工作。还有许多其他董事会使用尼龙搭扣,这不是独有的。但是我发现我和踏板幻灯片有点常常不得不重新定位。我认为这个问题是热的粘结剂在尼龙搭扣的时候失去粘性。
4所示。袋不擅长保护板和已经开始分崩离析(我拥有它不到一年)。我注意到他们有另一个更好质量的产品包(刚性泡沫),我不认为这是当我购买它。贵,但值得成本。
好的,只要你有简单的需求
这个东西是好的是负担得起的,简单。我喜欢这个董事会做得好。它是坚固的。尼龙搭扣好。事情坚持伟大的漂亮和舒适的美丽。它有所有你所需要的绳子。电源集成,所以麻烦免费的。目前为止一切都很顺利。
这是我为什么不给5星:
1。不买这个包的人。拉链坏了我第二次使用它。这不是柠檬....这只是便宜。你可以告诉只要看它,感觉它。10的10这些袋子将破碎的拉链后一年(或更少使用它们....我可能是过于慷慨;)。你可以要求更换袋,但它也将打破....所以有什么意义?袋子里是一个小比垃圾IMHO (lol
2。董事会只支持500毫安。这不是如果你很多超速踏板或国防部效果(比如我的TC麦克风技工踏板画300 ma)。只要记住这板只有简单的设置。
3所示。电子产品是好的,但是我不能担保他们最后。这件事显然是一个预算模型一旦你开始处理它。这是伟大的如果你要使用它在家里或演出。但如果你是一个音乐家演奏音乐好几个星期了,帮自己一个忙,去了一个很棒的400美元与难缠的人将比你的出头鸟的寿命:)我让我带几个婚礼我每年演出,所以它应该工作的很好。
总的来说,这是一个真正伟大的交易支付的。一个很好的交易。我真的爱我的。只知道你的需要,如果你需要更多的比这个板提供,不要浪费你的钱(除非这将抱着你直到你买得起更好的东西)。老实说,董事会本身是好的,所以即使电子戒烟,你可以尼龙搭扣上面的电源和使用多年。
抓住- N -去
这是一个很好的董事会扔几个踏板果酱会议和小即兴表演。电缆管理是有点棘手,但把一些尼龙搭扣的绑线安装垫片,问题已经解决了。
好的第一板
这是我第一次和很好,但我从未使用过生活,我也不会。的电源时削减了摆动到错误的地方,那是我不能风险发生在舞台上。然而,大小是完美的和它非常耐用。总的来说这是一个伟大的董事会,但下次我就去金属无动力的。
Pedalboard很好——gigbag很便宜
我满意,这是艰难的塑料,有结实的尼龙搭扣。gigbag似乎脆弱。携带带分崩离析和董事会倒在了地上。幸运的是,没有什么坏了,维可牢的踏板甚至没有离开。同样,为什么9 v电源线必须超过需要的?
好板,所以所以手提袋
它应该是什么。减少安装时间。面对它,它会重8踏板。塑料结束的肩膀带子断了和尼龙是撕裂的处理。弹道的情况不会持续很长时间,但是拉链袋方便。找一个手提箱/把它放在公文包
好的,不可以
我真的很喜欢它当新的,仍然会喜欢它,如果它一直在一起。拉链是惊人的光(脆弱),和权力杰克输入了。
不错,包但电源…
我有一用于小场地演出和排练。现在有一个Korg调谐器和三个踏板,取而代之的是更好的。像往常一样从斯威特沃特,董事188金宝搏官网是多少会及其辅助服务提供到达超快,包装得很好。董事会和演出的包都很好。问题是本质上是一个墙疣的电源。起初似乎工作好,但最近开发了一个非常讨厌的高频率的嗡嗡声。我大Furman SPB-8 pedalboard,我有15年以上死了安静。
我喜欢SKB董事会足以让它但是我很快就会取代廉价墙疣电源与巫术实验室ISO-5“真实”电源应解决的嗡嗡声问题,。
我给SKB PS-8两颗恒星因为电力供应,这本身率为零。
Skb pedalboard
它的目的持有我的踏板,但权力部分对我来说是没用的。我没有权力径向Tonebone,尽管告诉我。不是一个快乐的消费后联系客服,因为斯威特沃特将不会支付返回航运,。188金宝搏官网是多少所以我保持它,买了一个金属电源板和附加pedalboard。失望
=无用的。
所以,踏板板本身来说是足够的。它很便宜和塑料,但它的工作原理。“案例”,然而,糟透了。我第一次带肩带,小塑料扣坏了,价值700美元的踏板撞到人行道上。我真的不能相信这些塑胶件是廉价和脆弱。荒谬。下次我操纵破碎的一边,然后我试着使用它,另一边坏了。幸运的是,我有一个手指在扶手带,也不好和不应该被信任。然后,当包装从彩排,拉链口袋里刚掉。所以,现在我有一个没有肩带,不能关闭的配件口袋,一只手带,看起来是一个玩具,和一个主要隔间拉链肯定会很快失败。如果你买这个踏板,期望也买东西的用处,以便抬坛。 Fail.
不买如果你演奏音乐的音乐家吗
踏板板部分很好但袋是廉价的垃圾。我第一次把我的踏板,我把它捡起来处理它了。立即。我斯威特沃特188金宝搏官网是多少给我更换(这很好),但新袋以完全相同的方式。我有五个踏板,没有太疯狂。这个袋子是一个POS。我想买个强硬袋但他们不卖这个尺寸,现在我买东西完全不同。不要把你的时间浪费;如果你有真正的踏板和真正想要的东西你可以采取的地方,这不是它。
的