188金宝搏官网是多少斯威特沃特节省:
美元
400年
〇〇
厂商建议零售价:
美元
1999年
〇〇
更多的订单
库存的时候通知我
这个项目需要额外的从RME交货时间。保留你的现在,无风险,或与我们联系以获取更多信息。
顾客评论
分享你的想法
帮助其他音乐爱好者齿轮通过分享你的意见你购买的装备。
问一个销售工程师
或者打电话给我们(800)222 - 4700
质疑RME Fireface UCX II 40-channel USB接口?
188金宝搏官网是多少斯威特沃特的销售工程师被视为最有经验的音乐产业和知识渊博的专业人士,与广泛的音乐背景和强化训练在最新的产品和技术。他们可以为您提供个性化的产品建议任何时候你需要它。
输入你的问题下面或打电话给我们(800)222 - 4700
客户增加了媒体
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 16714, "store_items_review_id": 330984, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-6ad9f8a497dcf4cf6076c0948589f236c9e4b0a7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-aab475254e71eea96b3d50d52e95bfa99cb8829a\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "sir_title": "Outstanding", "sir_comments": "Id been wanting to upgrade to an RME interface for some time, from my aging Roland Quad-Capture - so when I saw the advance announcements for the new UCX II I was excited to jump onto it. And I must say: it was absolutely worth the wait: the difference is like night and day from what I had been using previously.
\nThe driver install (Im running Windows 10) was fast and painless, and easy to configure in my two main DAWs, Studio One and Bitwig Studio. I very highly recommend checking out the RME YouTube channel where they have great step-by-step instructions on how to use their excellent TotalMixFX software which is nowhere near as confusing as Id been led to believe from various online comments that Ive read! The many routing options you get are excellent, and easy to put into use.
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 25098, "store_items_review_id": 371700, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-74c9d656acd84e0ea6e375d0ae50f01e5b09dd26\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-711aab3527deaae9cbffa00e64e47399411e4376\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "sir_title": "Exceptional Performance", "sir_comments": "The unit is well build and scream pro right out of the box. Very easy to install and the integration is seamless with any system. I am running Cubase and Studio one and it is a breeze to setup the IO. The routing and other settings can easily be customized via the TotalMix FX. The driver of this system is very stable and I have never had any issue or dropout. One thing I like about it, is this unit can be extended via ADAT, SPDIF, AES\/EBU etc... The stand alone capability will let you take it on the road and it is suitable for any gig.
\nI am glad that I have upgraded my system with this unit.", "sir_rating": "4.5", "sir_name": "Jean Sanon", "sir_whereareyou": "Pembroke Pines, FL, FL", "sir_background": "", "sir_keepanonymous": "0" } ]" review-count="3">
最高额定评论
比UAD
今天我收到了这个单位,到目前为止,我爱它。我有Cubase 12个项目,以前流行的点击使用UAD司机时CPU上运行。RME运行相同的项目更好地比UAD缓冲区大小512是在2048年。不可思议的!
一个非常坚实的界面,你会持续很长一段时间!
我买了这个接口早一点在我需要性能比率,但作为一个windows用户的想法我喜欢升级到广泛报道的东西有最好的音频驱动程序可用。短篇小说,它们是一大区别!
单位本身是固体,有很多连接选项,总有点头脑,但混合容易设置一般使用,和我购买和可选的弧控制器的生活质量和易用性与我设置。这个组合已经很棒,这里展出的权力叶子很少想除了更多的XLR输入。
我以前使用的固体和清洁莫土语M4,虽然它是适合我的紧急需求,我真的有一些项目,推动单位的和软件的功能。所以一些研究之后,我决定拿起UCX二世斯威特沃特的帮助下,它是最好的投资之一我进入我的办公室/工作室。188金宝搏官网是多少我生活的一部分是由在电影和广告后期制作工作,有时与大规模的连锁效应和吨分层——我UCX二世没有眨了眨眼睛,超级可靠和通用的。现在花钱或花之后,你不能在这里出错——特别是对于Windows用户!
不错的
到目前为止对这个单位非常满意。坚如磐石的性能、优秀的转换(进出)。固体的IO的价格。我的需要和当前的完美单位数量的硬件。
完美的
爱总外汇。超级直观,灵活和容易使用。
接口是质量。低延迟,性能稳定在M1 pro 32缓冲区。
设置所有i / o和现在我可以把音乐和不必担心技术问题。它的接口工作,保持的。
为什么我等待这么长时间? ? ?
我得到了第一代阿波罗的孪生在2014年和2020年获得了双X,六年与双胞胎。几乎两个月前,我的一个朋友告诉我关于RME。一些研究之后,我抛弃了我的孪生X和RME UCX II。我可以告诉你从经验RME UCX II是跳跃比阿波罗的孪生。
1。孵蛋的很好。
2。前置放大器是清洁和更好。我得到72分贝的清洁前置放大器增益反对65分贝增益的彩色和阿波罗的孪生
3所示。更好的转换器,这意味着更好的转换。转换器在阿波罗的孪生是低于平均水平。
4所示。更清晰和更广泛的音景。我听到的东西混合,与阿波罗的孪生我没听见。
5。更多的输入和输出。RME UXC II:完全符合标准/ 20家。阿波罗的孪生X: 10 / 6。
6。你不能绕过前置放大器在阿波罗的孪生X当使用外部麦克风前置放大器。信号仍然通过阿波罗的孪生前置放大器,仍然加点颜色/声音信号来自外部的前置放大器。我发现这6个月前。这意味着我没有得到充分利用的冰原Shelford通道。切换到UCX二世后,问题解决了。
插件的插件现在联盟和一些来自UAD火花(13本地插件),反正我用在我的双重出售,我不需要双了这些插件运行。+我可以添加一个UAD卫星运行更多UAD插件如果我想。
唯一的双X RME UXC的二世是能够跟踪一致与前置放大器,这真的没关系如果你追踪与硬件设备。价格点,我为我的身体得到更大的快乐与RME UCX II。
我期待来自RME通常的质量
我拥有一个娃娃脸巡演在天,我仍然拥有Fireface UFX,我在工作中一直在使用。我一直使用UFX约8年了。我从来没有一个问题与单位。
现在UCX II为远程工作将是我的界面。我不能说足够好的东西Totalmix外汇。
我并不特别印象深刻的UCX二世因为我只是习惯了很高的质量标准RME的品牌。不能和我购买快乐。
我从蒙特利尔和我订购包裹第二天使用优先级与联邦快递运输。我付约15%的进口关税,营业税在魁北克。
杰出的
我想升级到一个RME界面一段时间了,从我的衰老罗兰Quad-Capture的提前通知,所以当我看到新UCX II我兴奋地跳上去。我必须说:这是绝对值得的等待:日夜不同的是像我以前一直使用。
司机安装(我运行Windows 10)是快速、无痛,且易于配置法在我的两个主要,工作室,Bitwig工作室。我高度推荐检查RME的YouTube频道,他们有伟大的逐步说明如何使用优秀TotalMixFX软件,远不及令人困惑的我一直相信从各种在线评论,我读过!许多路由选择你是优秀的,容易投入使用。
我听到立即认真改进整体音质去我工作室的近距离(以前我一直用我的远地点罗塞塔200转换器作为AD / DA前端老Quad-Capture)。和所有的额外的I / O UCX II提供了对我来说,我喜欢现在有如此多的更多的选择途径,从我的各种硬件处理器。
UCX II本身的构建质量很好:这是一块坚实的精心设计的齿轮,对编码器旋钮的感觉。显示屏是明亮和清晰,并提供即时可见许多功能。我也得到了可选RM-19二架装安装耳朵单位和折磨。一个“咄”信息没有在手册中提到的是标示单位本身:单位的主要电源开关是编码器旋钮本身——在一次推动力量,推动并保持2秒钟再次断电。
我很兴奋,看看传说中的RME司机提供低延迟。捆绑与UCX II Scuffham S-Gear amp sim软件,所以它安装后我抓起电话,直接插入它的两个仪器水平输入UCX II的前面,设置其缓冲降到了256,…哇!我感到震惊听不清任何延迟,没有明显的影响系统资源,知道我可以把缓冲区如果我想得更低。这对我来说开辟了很多新的可能性——这是一个勇敢的新世界……
在另一个RME的推荐用户,我知道,我也可选ARC-USB先进的远程控制,我强烈推荐它!我直接路由UCX二世对我近距离,而不是经过我的旧原始Mackie大旋钮我多年来(一个伟大单位本身,但是现在不再需要),和弧是完美的工作,与一个小得多的足迹释放办公桌空间。说,我确实发现6的USB连接线,UCX II为我只是有点太短就连接之间的背面UCX II(使用USB接口DURec)在我架和电弧在我的桌子上,离开电缆悬挂在空中。这是没什么大不了的,你可以很容易地得到一个便宜的USB电缆任何地方使用相反的我(和他们甚至提到手册是容易/廉价可用)。值得注意的是,你没有* *直接连接弧UCX II——如果你愿意,你可以把它插到你的电脑上,电脑就会知道它应该去的地方。
我在工作室安装UCX II约2周前,我爱它…我知道我目前为止,只有抓表面的我知道我能做什么。我很激动在更深的挖掘。
高度推荐。
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 16714, "store_items_review_id": 330984, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-6ad9f8a497dcf4cf6076c0948589f236c9e4b0a7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-aab475254e71eea96b3d50d52e95bfa99cb8829a\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "sir_title": "Outstanding", "sir_comments": "Id been wanting to upgrade to an RME interface for some time, from my aging Roland Quad-Capture - so when I saw the advance announcements for the new UCX II I was excited to jump onto it. And I must say: it was absolutely worth the wait: the difference is like night and day from what I had been using previously.
\nThe driver install (Im running Windows 10) was fast and painless, and easy to configure in my two main DAWs, Studio One and Bitwig Studio. I very highly recommend checking out the RME YouTube channel where they have great step-by-step instructions on how to use their excellent TotalMixFX software which is nowhere near as confusing as Id been led to believe from various online comments that Ive read! The many routing options you get are excellent, and easy to put into use.
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 25098, "store_items_review_id": 371700, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-74c9d656acd84e0ea6e375d0ae50f01e5b09dd26\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-711aab3527deaae9cbffa00e64e47399411e4376\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "sir_title": "Exceptional Performance", "sir_comments": "The unit is well build and scream pro right out of the box. Very easy to install and the integration is seamless with any system. I am running Cubase and Studio one and it is a breeze to setup the IO. The routing and other settings can easily be customized via the TotalMix FX. The driver of this system is very stable and I have never had any issue or dropout. One thing I like about it, is this unit can be extended via ADAT, SPDIF, AES\/EBU etc... The stand alone capability will let you take it on the road and it is suitable for any gig.
\nI am glad that I have upgraded my system with this unit.", "sir_rating": "4.5", "sir_name": "Jean Sanon", "sir_whereareyou": "Pembroke Pines, FL, FL", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="330984">
我爱这个单位。
这个单位是惊人的!如此多的力量在一个小小的包中。你可以相信RME的电子产品和软件。业界领先的低延迟性能,与可爱的音频转换将人很幸福的开始。然后变得疯狂。内部DSP -动力学和影响? ? ?TotalMix外汇软件混合器最高路由的灵活性? ? ? ?40通道DURec独立的记录能力? ? ? ?当我试着DURec创建跟踪和混合下来后,我觉得我偶然发现了一罐金子。这是一个梦想建立在UCX二世和使用。 This is my first RME unit, and it's made me wish I had gone to them a long time ago. They've been amazing for years. And I have some other stellar audio interfaces- but this one is so fun along with the outstanding quality. But as I'm learning, this is nothing new to long time RME users.
家庭工作室
说实话,我还没有机会正确测试火脸ucx2但我一直在做大量的评论和检查到火脸产品线,根据目前的状况来看我对我学习和真正的幸福我知道fireface产品在我的心和我的心我相信这是一个很好的购买和我将多年的使用本产品。
特殊的性能
单位是构建和尖叫pro的盒子。很容易安装和任何系统的集成是无缝的。我跑步Cubase和工作室,这是一个微风设置IO。路由和其他设置可以很容易地通过TotalMix FX定制。这个系统很稳定,我的司机从来没有任何问题或辍学。我喜欢它的一件事是,这个单位可以通过扩展传统法律SPDIF, AES /欧洲等……独立能力会让你在路上,它适用于任何演出。
我很高兴我有升级我的系统单元。
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 16714, "store_items_review_id": 330984, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-6ad9f8a497dcf4cf6076c0948589f236c9e4b0a7\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-aab475254e71eea96b3d50d52e95bfa99cb8829a\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjExMDIwMTE1MDU4LXBocGZpYTIxZS5wbmc=", "sir_title": "Outstanding", "sir_comments": "Id been wanting to upgrade to an RME interface for some time, from my aging Roland Quad-Capture - so when I saw the advance announcements for the new UCX II I was excited to jump onto it. And I must say: it was absolutely worth the wait: the difference is like night and day from what I had been using previously.
\nThe driver install (Im running Windows 10) was fast and painless, and easy to configure in my two main DAWs, Studio One and Bitwig Studio. I very highly recommend checking out the RME YouTube channel where they have great step-by-step instructions on how to use their excellent TotalMixFX software which is nowhere near as confusing as Id been led to believe from various online comments that Ive read! The many routing options you get are excellent, and easy to put into use.
\n
\nI heard immediate serious improvement to overall sound quality going out to my studios nearfields (previously I had been using my Apogee Rosetta 200 converter as my AD\/DA frontend to the old Quad-Capture). And with all the additional I\/O the UCX II provides for me, I love now having so many more options now to route to and from my various hardware processors.
\nThe build quality of the UCX II itself is excellent: this is a solid piece of well-designed gear, right down to the feel of the encoder knob. The display screen is bright and clear, and provides instant visibility to many functions. I also got the optional RM-19 II rackmount ears for the unit and have it racked. One \"duh\" piece of information that isnt mentioned in the manual though is labeled on the unit itself: the units main power switch is the encoder knob itself - push in once to power up, push in and hold for 2 seconds to power down again.
\n
\nI was excited to check out the legendary low latency the RME drivers provide. Bundled with the UCX II is Scuffham S-Gear amp sim software, so after I installed it I grabbed a Tele, plugged it straight into one of the two instrument level inputs on the front of the UCX II, set its buffers down to 256 and...whoa! I was shocked at how imperceptible any latency was, with no noticeable impact to system resources - and knowing that I could drop the buffers down even lower if I wanted too. This opens up a lot of new possibilities for me - its a brave new world...
\n
\nAt the recommendation of another RME user that I know, I also got the optional ARC-USB Advanced Remote Control as well - I highly recommend it too! Im routing straight out of the UCX II to my nearfields instead of going through my old original Mackie Big Knob Id had for years (a great unit itself, but now no longer needed), and the ARC is perfect for the job, with a much smaller footprint which freed up desk space as well. That said, I did find the 6 USB cable that comes with the UCX II to be just a little too short for me as far as connecting between the back of the UCX II (using the DURec USB jack) in my rack and the ARC on my desk, leaving the cable hanging up in the air. This was no big deal though, as you can easily get a cheap longer USB cable anywhere to use instead which I did (and they even mention in the manual as being easily\/cheaply available). Worth noting is that you dont *have* to connect the ARC directly to the UCX II - if you prefer, you can plug it into your computer and itll know where it needs to go from there.
\n
\nI installed the UCX II in my studio about 2 weeks ago and am loving it...and I know Im so far only scratching the surface of what I know I can do with it. Im excited to dig in deeper still.
\nVERY highly recommended.", "sir_rating": "5.0", "sir_name": "Har", "sir_whereareyou": "", "sir_background": "Multi-instrumentalist, vocalist\/voice artist, songwriter\/performer, engineer, producer, recording artist (prog, metal, ambient\/atmospheric, shoegaze\/metalgaze).", "sir_keepanonymous": "0" }, { "id": 25098, "store_items_review_id": 371700, "media_type": "image", "thumbnail": "https:\/\/media.sweetwater.com\/api\/i\/w-160__wm-__q-60__hmac-74c9d656acd84e0ea6e375d0ae50f01e5b09dd26\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "media_path": "https:\/\/media.sweetwater.com\/api\/i\/w-1080__wm-__q-60__hmac-711aab3527deaae9cbffa00e64e47399411e4376\/URL_aHR0cHM6Ly9zdG9yYWdlLmdvb2dsZWFwaXMuY29tL3dlYi11cGxvYWRzLTU1OTAyZmZjLzIwMjIwOTAyMTQzOTUyLXBocDd6amswZi5qcGVn", "sir_title": "Exceptional Performance", "sir_comments": "The unit is well build and scream pro right out of the box. Very easy to install and the integration is seamless with any system. I am running Cubase and Studio one and it is a breeze to setup the IO. The routing and other settings can easily be customized via the TotalMix FX. The driver of this system is very stable and I have never had any issue or dropout. One thing I like about it, is this unit can be extended via ADAT, SPDIF, AES\/EBU etc... The stand alone capability will let you take it on the road and it is suitable for any gig.
\nI am glad that I have upgraded my system with this unit.", "sir_rating": "4.5", "sir_name": "Jean Sanon", "sir_whereareyou": "Pembroke Pines, FL, FL", "sir_background": "", "sir_keepanonymous": "0" } ]" :for-review="371700">
最好的usb音频接口
我买了这个升级从400年Fireface RME停止一些年前。UCS有一些伟大的功能,包括DUREC(直接记录通过Usb闪存驱动器你插入的单元),直观,用户友好的前面板控制和前面板显示,这使得它可以操作它很好作为一个独立单位。不幸的是,对我来说,UCX没有显示高质量音频比RME Fireface 400多年前我买了,我想这是一个证明RME接口是多好。Fireface 400的麻烦在于,它会导致过热的MacBook pro在回放期间,使计算机的风扇打开大声。之后我发现新的M1 Mac,这不是一个问题。它可以处理的火线没有计算机的CPU征税。所以我最终返回UCX并保持400年Fireface仍然支持,尽管停止,TotalMIx的当前版本。
尝试的时候,我很难找出如何分配不同的效果,不同的渠道。不确定是否可以用这个单位。如果有人的解决方案,请发表评论。
期权总混合情况下,有一种辅助RME设备添加到混合控制台,但目前只有一个RME的设备可以菊花链方式,12通道麦克风前置放大器。我希望这个设置允许我添加Fireface 400作为一个辅助装置,但没有。所以要注意,如果你有多个RME设备。你仍然可以建立一个聚合装置使用音频midi设置但你必须为每个设备总混合控制台导航到一个不同的这样做。
的增益结构UCX有点不同于停止FireFace 400。FF400,我不必把输入增益高接受良好的记录水平。不确定事项,但我在比较这两个东西我注意到。
你不能与UCXII出错。这是一个很好的单位。我刚发现我不需要它在比较老Fireface 400